4 open source boards using the TL072HIDR

Real designs built with the TL072HIDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The TL072HIDR in open source designs

The gallery holds 4 open source boards using the TL072HIDR from 4 GitHub repositories; a typical one measures about 131.7 × 114.3 mm and carries around 80 components.

75% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Spark inducer by 30350n.

Parts used alongside the TL072HIDR

Microcontrollers on boards using the TL072HIDR

What boards using the TL072HIDR are built for

TL072HIDR: common questions

Where can I find a TL072HIDR reference design?

Each of the 4 boards on this page is a real design using the TL072HIDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TL072HIDR use?

Most are built on STM32 (1).

How big is a typical board using the TL072HIDR?

The median is 131.7 × 114.3 mm, and 75% are two-layer designs.

What is the most popular open source board using the TL072HIDR?

By GitHub stars, Spark inducer by 30350n, with 22 stars.

Can I simulate one of these boards using the TL072HIDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part