7 open source boards using the TL074HIDR

Real designs built with the TL074HIDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TL074HIDR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TL074HIDR connects to, and the resistors, capacitors and other passives placed on it.

  • The - pins have a series resistor on 6 of 6 designs, most often 0 Ω (then 100 kΩ).
  • The ~_7 pin has a series resistor on 6 of 6 designs, most often 0 Ω (then 10 kΩ).
  • The ~_8 pin has a series resistor on 6 of 6 designs, most often 0 Ω (then 10 kΩ).
  • The + pins have a series resistor on 5 of 6 designs, most often 1 kΩ (then 56 kΩ).
~_1pin 1Connected to: Signal 100%
  • Series resistor on 50% · 0 Ω (2), 10 kΩ (2), 100 kΩ (1)
-pin 2, 6, 9, 13Connected to: Signal 96%
  • Series resistor on 100% · 0 Ω (8), 100 kΩ (3), 470 Ω (3)
  • Resistor to GND on 67% · 10 kΩ (9), 1 kΩ (2), 39 kΩ (2)
+pin 3, 5, 10, 12Connected to: Signal 96%
  • Series resistor on 83% · 1 kΩ (10), 56 kΩ (2), 15 kΩ (1)
V+pin 4Connected to: 12V 100%
  • Decoupling capacitor on 33% · 100 nF (2), 1 µF (1)
~_7pin 7Connected to: Signal 100%
  • Series resistor on 100% · 0 Ω (2), 10 kΩ (2), 6.04 kΩ (1)
~_8pin 8Connected to: Signal 100%
  • Series resistor on 100% · 0 Ω (2), 10 kΩ (2), 1.5 MΩ (1)
V-pin 11Connected to: -12V 100%
  • Decoupling capacitor on 33% · 100 nF (2), 1 µF (1)
~_14pin 14Connected to: Signal 100%
  • Series resistor on 83% · 100 kΩ (2), 0 Ω (2), 10 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Arpeggiator by EwoudVV, GateDr mainboard by PajamaLlamaLand, BufferedMult by domesticmouse and FinalThesis by RamsesKlap.

The TL074HIDR in open source designs

The gallery holds 7 open source boards using the TL074HIDR from 7 GitHub repositories; a typical one measures about 38.5 × 107 mm and carries around 56 components.

71% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.

The most starred is Arpeggiator by EwoudVV.

Parts used alongside the TL074HIDR

Microcontrollers on boards using the TL074HIDR

What boards using the TL074HIDR are built for

TL074HIDR: common questions

Where can I find a TL074HIDR reference design?

Each of the 7 boards on this page is a real design using the TL074HIDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TL074HIDR - pin?

The - pins have a series resistor on 6 of 6 designs, most often 0 Ω (then 100 kΩ). Counted from the KiCad layouts of 6 open source designs using the TL074HIDR.

What resistor goes on the TL074HIDR ~_7 pin?

The ~_7 pin has a series resistor on 6 of 6 designs, most often 0 Ω (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the TL074HIDR.

What resistor goes on the TL074HIDR ~_8 pin?

The ~_8 pin has a series resistor on 6 of 6 designs, most often 0 Ω (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the TL074HIDR.

Which microcontrollers do boards using the TL074HIDR use?

Most are built on RP2040/RP2350 (1), Microchip SAM (1) and STM32 (1).

How big is a typical board using the TL074HIDR?

The median is 38.5 × 107 mm, and 71% are two-layer designs.

What is the most popular open source board using the TL074HIDR?

By GitHub stars, Arpeggiator by EwoudVV, with 1 stars.

Can I simulate one of these boards using the TL074HIDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part