Linus-Keyboard

Schlafhase·Linus-Keyboard·pcb/hackpad-full-keyboard.kicad_pcb

Linus-Keyboard PCB layout, top view — open source RP2040/RP2350 board by Schlafhase

About the Linus-Keyboard PCB

Linus-Keyboard is an open source RP2040/RP2350 PCB design by Schlafhase, published on GitHub. It is a 2-layer board measuring 428.5 × 130.9 mm, with 276 components from 27 distinct parts.

Its main chip is the Raspberry_Pi_Pico, from the RP2040/RP2350 family. Other key parts include the SW_Push_45deg. By type, the board carries 172 diodes, 20 fuses, 3 connectors, 2 ICs, 2 modules and 2 crystals.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Trying to design my own keyboard

- The keys in the top row are ESC, F1 - F18, F25 - I removed the right column of the numpad since I never use it - I also moved the numlock key to the bottom row and removed the top row of the numpad as well - I replaced the second Windows key with another key which will probably activate a custom layer in my keymap - I added two buttons to the sides of the up arrow key: - A backspace key on the left - A delete key on the right

Linus-Keyboard, from the project README
From the project README

Main components on the Linus-Keyboard

Linus-Keyboard bill of materials (BOM)

276 components, 27 distinct parts.

QtyPartRefs
1
SW_Push_45deg
U0
1
Raspberry_Pi_Pico
U1
2
SW_Push_45deg
A0, M0
1
SW_Push_45deg
Q0
2
SW_Push_45deg
X0, Y0
2
SW_Push_45deg
J0, P0
1
Conn_01x04_Pin
J2
53
SW_Push_45deg
'0, ,0, -0, .0, /0, ;0, =0, B0 +45
3
SW_Push_45deg
ALT0, ALTGR0, LSHIFT0
2
SW_Push_45deg
BACKSPACE0, NUMPAD0
2
SW_Push_45deg
CAPSLOCK0, RIDER0
1
SW_Push_45deg
ENTER0
20
SW_Push_45deg
F0, F1, F2, F3, F4, F5, F6, F7 +12
1
SW_Push_45deg
H0
1
SW_Push_45deg
K0
3
SW_Push_45deg
LCTRL0, RCTRL0, WINDOWS0
1
SW_Push_45deg
RSHIFT0
1
SW_Push_45deg
S0
1
SW_Push_45deg
SPACE0
1
SW_Push_45deg
T0
Show 7 more
QtyPartRefs
1
SW_Push_45deg
TAB0
1
SW_Push_45deg
D0
104
D
D1, D2, D3, D4, D5, D6, D7, D8 +96
67
SK6812
D30, D31, D66, D67, D68, D69, D89, D101 +59
1
SW_Push_45deg
L0
1
SW_Push_45deg
C0
1
SW_Push_45deg
R0

Linus-Keyboard design files

The KiCad project lives in the Schlafhase/Linus-Keyboard repository on GitHub; these links point at the commit this page was built from.

Linus-Keyboard: common questions

What microcontroller does the Linus-Keyboard use?

The Linus-Keyboard is built around the Raspberry_Pi_Pico, from the RP2040/RP2350 family.

How big is the Linus-Keyboard PCB?

The Linus-Keyboard measures 428.5 × 130.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Linus-Keyboard?

276 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Linus-Keyboard design files?

From the Schlafhase/Linus-Keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Linus-Keyboard design in my own project?

The repository has no license, so all rights stay with Schlafhase. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Linus-Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards