2 open source boards using the SW_Push_45deg

Real designs built with the SW_Push_45deg, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SW_Push_45deg in open source designs

The gallery holds 2 open source boards using the SW_Push_45deg from 2 GitHub repositories; a typical one measures about 270.2 × 96.5 mm and carries around 175 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Atmega328kb by ccadic.

Microcontrollers on boards using the SW_Push_45deg

What boards using the SW_Push_45deg are built for

SW_Push_45deg: common questions

Where can I find a SW_Push_45deg reference design?

Each of the 2 boards on this page is a real design using the SW_Push_45deg. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SW_Push_45deg use?

Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).

How big is a typical board using the SW_Push_45deg?

The median is 270.2 × 96.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the SW_Push_45deg?

By GitHub stars, Atmega328kb by ccadic, with 10 stars.

Can I simulate one of these boards using the SW_Push_45deg before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part