HardLabs

Iowa rover kiosk lamps

scimusmn·iowa-rover·kiosk/electronics/iowa-rover-kiosk-lamps/iowa-rover-kiosk-lamps.kicad_pcb

Iowa rover kiosk lamps PCB layout, top view — open source board by scimusmn

About the Iowa rover kiosk lamps PCB

Iowa rover kiosk lamps is an open source PCB design by scimusmn, published on GitHub. It is a 2-layer board measuring 87.6 × 36.8 mm, with 7 components from 4 distinct parts.

Other key parts include the TPIC6B595. By type, the board carries 1 IC, 1 connector and 1 resistor.

From the project

Iowa Science Rover - Electronics ================================

Iowa Science Rover - Electronics ================================

Due to the myriad inputs and outputs that need to be managed, the electronics of the kiosk have been split into a constellation of connected boards rather than using a single monolithic board. The scheme of connections is as follows:

Arduino Mega: This is an ATmega2560-based microcontroller, used as the central processor for the kiosk. Mega Adapter: This provides a convenient 40-pin ribbon cable connection between the Arduino Mega and the main board. It carries power from the main board to the Arduino. Main Board: The heart…

Iowa rover kiosk lamps, from the project README
From the project README

Main components on the Iowa rover kiosk lamps

TPIC6B595

Iowa rover kiosk lamps bill of materials (BOM)

7 components, 4 distinct parts.

QtyPartRefs
1
TPIC6B595
U1
1
Conn_01x08
J1
4
Lamp
RFID Lamp 1, RFID Lamp 2, RFID Lamp 3, RFID Lamp 4
1
R
R1

Iowa rover kiosk lamps design files

The KiCad project lives in the scimusmn/iowa-rover repository on GitHub; these links point at the commit this page was built from.

Iowa rover kiosk lamps: common questions

How big is the Iowa rover kiosk lamps PCB?

The Iowa rover kiosk lamps measures 87.6 × 36.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Iowa rover kiosk lamps?

7 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Iowa rover kiosk lamps design files?

From the scimusmn/iowa-rover repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Iowa rover kiosk lamps design in my own project?

The repository has no license, so all rights stay with scimusmn. Use it as a reference, and ask the author before reusing the design.

More boards in iowa-rover