HardLabs

Iowa rover kiosk programmer

scimusmn·iowa-rover·kiosk/electronics/iowa-rover-kiosk-programmer/iowa-rover-kiosk-programmer.kicad_pcb

Iowa rover kiosk programmer PCB layout, top view — open source board by scimusmn

About the Iowa rover kiosk programmer PCB

Iowa rover kiosk programmer is an open source PCB design by scimusmn, published on GitHub. It is a 2-layer board measuring 151.1 × 31.8 mm, with 20 components from 6 distinct parts.

Other key parts include the ID12-LA. By type, the board carries 9 resistors, 5 switches, 4 diodes, 1 IC and 1 connector.

It belongs with the usb & debug tools designs in this gallery.

From the project

Iowa Science Rover - Electronics ================================

Iowa Science Rover - Electronics ================================

Due to the myriad inputs and outputs that need to be managed, the electronics of the kiosk have been split into a constellation of connected boards rather than using a single monolithic board. The scheme of connections is as follows:

Arduino Mega: This is an ATmega2560-based microcontroller, used as the central processor for the kiosk. Mega Adapter: This provides a convenient 40-pin ribbon cable connection between the Arduino Mega and the main board. It carries power from the main board to the Arduino. Main Board: The heart…

Iowa rover kiosk programmer, from the project README
From the project README

Main components on the Iowa rover kiosk programmer

ID12-LA

Iowa rover kiosk programmer bill of materials (BOM)

20 components, 6 distinct parts.

QtyPartRefs
1
ID12-LA
U1
1
Conn_02x06_Odd_Even
J1
5
SW_Push
SW1, SW2, SW3, SW4, SW5
4
LED
D1, D2, D3, D4
4
1k
R1, R2, R3, R4
5
10k
R5, R6, R7, R8, R9

Iowa rover kiosk programmer design files

The KiCad project lives in the scimusmn/iowa-rover repository on GitHub; these links point at the commit this page was built from.

Iowa rover kiosk programmer: common questions

How big is the Iowa rover kiosk programmer PCB?

The Iowa rover kiosk programmer measures 151.1 × 31.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Iowa rover kiosk programmer?

20 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Iowa rover kiosk programmer design files?

From the scimusmn/iowa-rover repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Iowa rover kiosk programmer design in my own project?

The repository has no license, so all rights stay with scimusmn. Use it as a reference, and ask the author before reusing the design.

More boards in iowa-rover

Similar boards