HardLabs

Iowa rover kiosk level buttons

scimusmn·iowa-rover·kiosk/electronics/iowa-rover-kiosk-level-buttons/iowa-rover-kiosk-level-buttons.kicad_pcb

Iowa rover kiosk level buttons PCB layout, top view — open source board by scimusmn

About the Iowa rover kiosk level buttons PCB

Iowa rover kiosk level buttons is an open source PCB design by scimusmn, published on GitHub. It is a 2-layer board measuring 137.8 × 41.3 mm, with 26 components from 5 distinct parts.

Other key parts include the TPIC6B595. By type, the board carries 8 resistors, 1 IC and 1 connector.

From the project

Iowa Science Rover - Electronics ================================

Iowa Science Rover - Electronics ================================

Due to the myriad inputs and outputs that need to be managed, the electronics of the kiosk have been split into a constellation of connected boards rather than using a single monolithic board. The scheme of connections is as follows:

Arduino Mega: This is an ATmega2560-based microcontroller, used as the central processor for the kiosk. Mega Adapter: This provides a convenient 40-pin ribbon cable connection between the Arduino Mega and the main board. It carries power from the main board to the Arduino. Main Board: The heart…

Iowa rover kiosk level buttons, from the project README
From the project README

Main components on the Iowa rover kiosk level buttons

TPIC6B595

Iowa rover kiosk level buttons bill of materials (BOM)

26 components, 5 distinct parts.

QtyPartRefs
1
TPIC6B595
U2
1
Conn_02x08_Top_Bottom
J1
8
SW_Push
Btn Down 1, Btn Down 2, Btn Down 3, Btn Down 4, Btn Up 1, Btn Up 2, Btn Up 3, Btn Up 4
8
Lamp
Lamp Down 1, Lamp Down 2, Lamp Down 3, Lamp Down 4, Lamp Up 1, Lamp Up 2, Lamp Up 3, Lamp Up 4
8
R
R1, R2, R3, R4, R5, R6, R7, R8

Iowa rover kiosk level buttons design files

The KiCad project lives in the scimusmn/iowa-rover repository on GitHub; these links point at the commit this page was built from.

Iowa rover kiosk level buttons: common questions

How big is the Iowa rover kiosk level buttons PCB?

The Iowa rover kiosk level buttons measures 137.8 × 41.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Iowa rover kiosk level buttons?

26 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Iowa rover kiosk level buttons design files?

From the scimusmn/iowa-rover repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Iowa rover kiosk level buttons design in my own project?

The repository has no license, so all rights stay with scimusmn. Use it as a reference, and ask the author before reusing the design.

More boards in iowa-rover