10 open source boards using the TPIC6B595
Real designs built with the TPIC6B595, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Column driver
CarlRaymond
100 × 100 mm104 parts2LNo license44AVR/Arduino
Mtg life counter
mprosk
167.6 × 101.6 mm85 parts2LCERN-OHL-S-2.019Raspberry Pi
ETANixieClock
drkmsmithjr
240 × 38.7 mm120 parts2LCustom license6AVR/Arduino
AT90S2323/AT90S2343 demo board
atoomnetmarc
99.1 × 99.1 mm167 parts2LApache-2.04Alexandrie
F6ITU
100 × 100 mm43 parts2LNo license2AVR/Arduino
Wordclock
maelgui
221 × 221 mm153 parts2LNo license0ESP8266
LED-Strip clock
atoomnetmarc
142.2 × 116.8 mm104 parts2LApache-2.00AVR/Arduino
Row driver
CarlRaymond
100 × 100 mm80 parts2LNo license44Iowa rover kiosk level buttons
scimusmn
137.8 × 41.3 mm26 parts2LNo license1Iowa rover kiosk lamps
scimusmn
87.6 × 36.8 mm7 parts2LNo license1
How designs wire the TPIC6B595
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPIC6B595 connects to, and the resistors, capacitors and other passives placed on it.
- The SRCLR pin is tied to 5V on 5 of 8 designs (a signal on 3).
- The VCC pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 20 | Connected to: Not connected 63% · GND 38% | — |
| VCCpin 2 | Connected to: 5V 100% |
|
| SRCLRpin 8 | Connected to: 5V 63% · a signal 38% | — |
| GNDpin 10, 11, 19 | Connected to: GND 100% | — |
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Column driver by CarlRaymond, Mtg life counter by mprosk, ETANixieClock by drkmsmithjr and AT90S2323/AT90S2343 demo board by atoomnetmarc.
The TPIC6B595 in open source designs
The gallery holds 10 open source boards using the TPIC6B595 from 8 GitHub repositories; a typical one measures about 118.9 × 100 mm and carries around 95 components.
100% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is Column driver by CarlRaymond.
Parts used alongside the TPIC6B595
Microcontrollers on boards using the TPIC6B595
What boards using the TPIC6B595 are built for
TPIC6B595: common questions
Where can I find a TPIC6B595 reference design?
Each of the 10 boards on this page is a real design using the TPIC6B595. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPIC6B595 SRCLR pin connected?
The SRCLR pin is tied to 5V on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the TPIC6B595.
What decoupling capacitors do designs use on the TPIC6B595 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the TPIC6B595.
What parts are used alongside the TPIC6B595?
The 74HC595, 74HCT04, ATMEGA328P-AU and L7805 appear in the most repositories here.
Which microcontrollers do boards using the TPIC6B595 use?
Most are built on AVR/Arduino (4), ESP8266 (1) and Raspberry Pi (1).
How big is a typical board using the TPIC6B595?
The median is 118.9 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the TPIC6B595?
By GitHub stars, Column driver by CarlRaymond, with 44 stars.
Can I simulate one of these boards using the TPIC6B595 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.