HardLabs

Tilt

Sealflux·Tilt·PCB/Tilt.kicad_pcb

Tilt PCB layout, top view — open source ESP32 board by Sealflux

About the Tilt PCB

Tilt is an open source ESP32 PCB design by Sealflux, published on GitHub under the MIT license. It is a 2-layer board measuring 49 × 59.5 mm, with 13 components from 12 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the ISM303DACTR, HS96L03W2C03, SPX3819M5-L-1-8/TR and LSF0108PWR. By type, the board carries 5 ICs, 5 capacitors, 1 battery holder and 1 switch.

It belongs with the displays & leds and power & battery designs in this gallery.

From the project

A motion controlled keychain game console.

Tilt, from the project README
From the project README

Main components on the Tilt

ISM303DACTRXIAO-ESP32-C3-SMDHS96L03W2C03SPX3819M5-L-1-8/TRLSF0108PWR

Tilt bill of materials (BOM)

13 components, 12 distinct parts.

QtyPartRefs
1
ISM303DACTR
ST(意法半导体)
U1
1
XIAO-ESP32-C3-SMD
U2
1
HS96L03W2C03
HS(汉昇)
U3
1
SPX3819M5-L-1-8/TR
SPX3819M5-L-1-8
MaxLinear(迈凌)
U4
1
LSF0108PWR
TI(德州仪器)
U5
1
Battery_Cell
BT1
1
1207-P6.5MM
XHXDZ(兴华鑫)
BUZZER1
1
SW_Push
SW1
2
CC0402KRX7R7BB104
100 nF
YAGEO(国巨)
C1, C2
1
GRM31CR60J227ME11L
220 uF
muRata(村田)
C3
1
ECR1HBK100MLL050011
10 uF
Jianghai(南通江海)
C4
1
CC0603KRX7R9BB103
10nF
YAGEO(国巨)
C5

Tilt design files

The KiCad project lives in the Sealflux/Tilt repository on GitHub; these links point at the commit this page was built from.

Tilt: common questions

What microcontroller does the Tilt use?

The Tilt is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Tilt PCB?

The Tilt measures 49 × 59.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tilt?

13 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tilt design files?

From the Sealflux/Tilt repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tilt design in my own project?

Yes, under the terms of its MIT license, which Sealflux chose for the repository.

Can I test firmware for the Tilt without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards