Ble actuator board
seanconway·ble-actuator-board·kicad/ble-actuator-board.kicad_pcb
About the Ble actuator board
Ble actuator board is an open source Nordic nRF PCB design by seanconway, published on GitHub. It is a 4-layer board measuring 40 × 40 mm, with 44 components from 26 distinct parts.
Its main chip is the MDBT50Q-P1MV2, from the Nordic nRF family. Other key parts include the NPM1300-QEAA-R, DRV8213RTER and DRV5032FBLPGM. By type, the board carries 17 capacitors, 12 resistors, 4 ICs, 4 diodes, 2 connectors and 2 inductors.
It belongs with the iot & wireless and robotics & motion designs in this gallery.
From the project
BLE smart-lock board: nRF52840 + nPM1300 + DRV8213, KiCad 10
Product: a pocket-sized container with an IoT smart lock. A Hall switch senses the lid, and a small gearmotor drives a locking bar into place. The board talks to a phone app over Bluetooth LE, charges from USB-C, and has no buttons. Scope: prototype PCB rev 1: schematic, off-board parts, layout, and how the board fits into the enclosure Status: layout complete, ERC/DRC clean (KiCad 10), not yet ordered
Main components on the Ble actuator board
Ble actuator board bill of materials (BOM)
44 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MDBT50Q-P1MV2 | Raytac_MDBT50Q | U1 |
| 1 | NPM1300-QEAA-R nPM1300-QEAA-R | QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias | U2 |
| 1 | DRV8213RTER | RTE0016C-MFG | U3 |
| 1 | DRV5032FBLPGM | SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm | U4 |
| 1 | IND-GM-609-699 | SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | M1 |
| 1 | UJC-H-G-SMT-2-P6 UJC-H-G-SMT-2-P6-TR | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
| 1 | C295747 S2B-PH-SM4-TB | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | KLJ-1230 | BUZ-SMD_L12.0-W12.0 | BZ1 |
| 1 | NCP18XH103F03RB | R_0603_1608Metric | TH1 |
| 1 | LTVS16H12T5G | DFN1610-2L_L1.6-W1.0-P1.22 | D1 |
| 2 | ESD9B5.0ST5G | D_SOD-923 | D2, D3 |
| 1 | P4-1204RGBWS2-1.5T-A NH-B1515RGBA-GF | LED-SMD_4P-L3.2-W1.5_P4-1204RGBWS2-1.5T-A | D4 |
| 2 | WIP201610S-2R2ML 2.2uH | L_Inpaq_WIP201610S_2.0x1.6mm | L1, L2 |
| 7 | CL10A106MA8NRNC 10uF | C_0603_1608Metric | C1, C6, C7, C10, C12, C15, C16 |
| 6 | CL05B104KO5NNNC 100nF | C_0402_1005Metric | C2, C5, C9, C11, C13, C17 |
| 2 | CL10B105KB8NQNC 1uF | C_0603_1608Metric | C3, C8 |
| 1 | CL10A225KO8NNNC 2.2uF | C_0603_1608Metric | C4 |
| 1 | GRM1555C1H222JA01D 2.2nF | C_0402_1005Metric | C14 |
| 4 | 0402WGF1002TCE 10k | R_0402_1005Metric | R1, R4, R5, R6 |
| 2 | 0603WAF0000T5E 0R | R_0603_1608Metric | R2, R10 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0603WAF1503T5E 150k | R_0603_1608Metric | R3 |
| 1 | 0603WAF5101T5E 5.1k | R_0603_1608Metric | R7 |
| 1 | 0402WGF1003TCE 100k | R_0402_1005Metric | R8 |
| 1 | 0402WGF2003TCE 200k | R_0402_1005Metric | R9 |
| 1 | 0402WGF1001TCE 1k | R_0402_1005Metric | R11 |
| 1 | 0402WGF1000TCE 100R | R_0402_1005Metric | R12 |
Ble actuator board design files
The KiCad project lives in the seanconway/ble-actuator-board repository on GitHub; these links point at the commit this page was built from.
Ble actuator board: common questions
What microcontroller does the Ble actuator board use?
The Ble actuator board is built around the MDBT50Q-P1MV2, from the Nordic nRF family.
How big is the Ble actuator board?
The Ble actuator board measures 40 × 40 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Ble actuator board?
44 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ble actuator board design files?
From the seanconway/ble-actuator-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ble actuator board design in my own project?
The repository has no license, so all rights stay with seanconway. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ble actuator board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381