7 open source boards using the NPM1300-QEAA-R
Real designs built with the NPM1300-QEAA-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NPM1300-breakout
rroels
40 × 29 mm23 parts2LNo license1Nordic nRF
Alidade
KeatonClark
277.2 × 107.5 mm194 parts2LNo license0Renesas
Project SolarPoints
Grolla05
40 × 85 mm102 partsNo license0Nordic nRF
Eeg
bradkim06
35 × 23 mm71 parts6LApache-2.00Nordic nRF
Ble actuator board
seanconway
40 × 40 mm44 parts4LNo license0- schematic only · 76 parts
Refremote nordic
seanconway
76 partsNo license0 NRF5340
ihsan92UM
29.6 × 29.6 mm29 parts4LNo license1
How designs wire the NPM1300-QEAA-R
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the NPM1300-QEAA-R connects to, and the resistors, capacitors and other passives placed on it.
- The SW2 pin has a inductor on 6 of 6 designs, most often 2.2 µH.
- The VSET2 pin has a resistor to GND on 6 of 6 designs, most often 150 kΩ (then 330 kΩ).
- The VBAT pin has a decoupling capacitor on 5 of 6 designs, most often 2.2 µF.
- The VBUS pin has a decoupling capacitor on 5 of 6 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUT1pin 1 | Connected to: VSYS 50% · a signal 50% |
|
| PVSS1pin 2 | Connected to: GND 83% · a signal 17% | — |
| SW1pin 3 | Connected to: Signal 67% · not connected 33% |
|
| PVDDpin 4 | Connected to: VSYS 83% · a signal 17% |
|
| SW2pin 5 | Connected to: Signal 100% |
|
| PVSS2pin 6 | Connected to: GND 67% · a signal 33% |
|
| GPIO0pin 7 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO2pin 9 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO3pin 10 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO4pin 11 | Connected to: Not connected 67% · a signal 33% | — |
| VDDIOpin 12 | Connected to: DVDD 83% · a signal 17% |
|
| SDApin 13 | Connected to: The microcontroller 33% · not connected 17% |
|
| SCLpin 14 | Connected to: The microcontroller 33% · not connected 17% |
|
| VSET2pin 16 | Connected to: Signal 100% |
|
| VSET1pin 17 | Connected to: GND 50% · a signal 50% |
|
| NTCpin 18 | Connected to: GND 67% · not connected 17% · a signal 17% | — |
| VBATpin 19 | Connected to: VBAT 83% · a signal 17% |
|
| VSYSpin 20 | Connected to: VSYS 100% |
|
| VBUSpin 21 | Connected to: VBUS 67% · a signal 33% |
|
| VBUSOUTpin 22 | Connected to: VBUSOUT 67% · a signal 33% |
|
| LSOUT1/VOUTLDO1pin 29 | Connected to: GND 50% · not connected 17% · a signal 33% |
|
| LSOUT2/VOUTLDO2pin 31 | Connected to: GND 50% · not connected 17% · a signal 33% |
|
| VOUT2pin 32 | Connected to: VDD 67% · a signal 33% |
|
| PADpin 33 | Connected to: GND 100% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NRF5340 by ihsan92UM, NPM1300-breakout by rroels, Eeg by bradkim06 and Project SolarPoints by Grolla05.
The NPM1300-QEAA-R in open source designs
The gallery holds 7 open source boards using the NPM1300-QEAA-R from 7 GitHub repositories; a typical one measures about 40 × 34.8 mm and carries around 71 components.
60% use four copper layers or more, and 14% carry an open source license.
The most starred is NRF5340 by ihsan92UM.
Microcontrollers on boards using the NPM1300-QEAA-R
What boards using the NPM1300-QEAA-R are built for
NPM1300-QEAA-R: common questions
Where can I find a NPM1300-QEAA-R reference design?
Each of the 7 boards on this page is a real design using the NPM1300-QEAA-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NPM1300-QEAA-R SW2 pin connected?
The SW2 pin has a inductor on 6 of 6 designs, most often 2.2 µH. Counted from the KiCad layouts of 6 open source designs using the NPM1300-QEAA-R.
What resistor goes on the NPM1300-QEAA-R VSET2 pin?
The VSET2 pin has a resistor to GND on 6 of 6 designs, most often 150 kΩ (then 330 kΩ). Counted from the KiCad layouts of 6 open source designs using the NPM1300-QEAA-R.
What decoupling capacitors do designs use on the NPM1300-QEAA-R VBAT pin?
The VBAT pin has a decoupling capacitor on 5 of 6 designs, most often 2.2 µF. Counted from the KiCad layouts of 6 open source designs using the NPM1300-QEAA-R.
Which microcontrollers do boards using the NPM1300-QEAA-R use?
Most are built on Nordic nRF (3) and Renesas (1).
How big is a typical board using the NPM1300-QEAA-R?
The median is 40 × 34.8 mm, and 40% are two-layer designs.
What is the most popular open source board using the NPM1300-QEAA-R?
By GitHub stars, NRF5340 by ihsan92UM, with 1 stars.
Can I simulate one of these boards using the NPM1300-QEAA-R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.