11 open source boards using the MDBT50Q-P1MV2

Real designs built with the MDBT50Q-P1MV2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

The MDBT50Q-P1MV2 in open source designs

The gallery holds 11 open source boards using the MDBT50Q-P1MV2 from 4 GitHub repositories; a typical one measures about 30 × 51.6 mm and carries around 59 components.

82% use four copper layers or more, and 0% carry an open source license.

The most starred is ReTerminalEM-NVMe mPCIe-USB-BLE by stanleyondrus.

Microcontrollers on boards using the MDBT50Q-P1MV2

What boards using the MDBT50Q-P1MV2 are built for

MDBT50Q-P1MV2: common questions

Where can I find a MDBT50Q-P1MV2 reference design?

Each of the 11 boards on this page is a real design using the MDBT50Q-P1MV2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MDBT50Q-P1MV2 use?

Most are built on Nordic nRF (11).

How big is a typical board using the MDBT50Q-P1MV2?

The median is 30 × 51.6 mm, and 18% are two-layer designs.

What is the most popular open source board using the MDBT50Q-P1MV2?

By GitHub stars, ReTerminalEM-NVMe mPCIe-USB-BLE by stanleyondrus, with 23 stars.

Can I simulate one of these boards using the MDBT50Q-P1MV2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part