Sunboard
seanlim·sunboard·pcb/sunboard/sunboard.kicad_pcb
About the Sunboard PCB
Sunboard is an open source ESP32 PCB design by seanlim, published on GitHub. It is a 2-layer board measuring 173.5 × 226.9 mm, with 319 components from 8 distinct parts.
Its main chip is the ESP32_NODEMCU, from the ESP32 family. Other key parts include the CD74HC4067M. By type, the board carries 155 switches, 154 diodes, 4 resistors, 3 ICs, 2 capacitors and 1 connector.
It belongs with the iot & wireless designs in this gallery.
From the project
The Moonboard is a popular training tool used by climbers across the world. It is a standardised, interactive training wall with LED lights embedded into it. The LEDs are controlled by a control unit (Moonboard control box), and light up to indicate the current problem. The contr
The Moonboard is a popular training tool used by climbers across the world. It is a standardised, interactive training wall with LED lights embedded into it. The LEDs are controlled by a control unit (Moonboard control box), and light up to indicate the current problem. The control unit connects to the Moonboard companion app via Bluetooth, and can be controlled by users through the app.
Main components on the Sunboard
Sunboard bill of materials (BOM)
319 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CD74HC4067M | SOIC-24W_7.5x15.4mm_P1.27mm | U1, U2 |
| 1 | ESP32_NODEMCU | MODULE_ESP32_NODEMCU | U3 |
| 1 | Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 154 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +146 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW155 |
| 154 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +146 |
| 2 | 100n | C_0805_2012Metric | C1, C2 |
| 4 | 10k | R_0805_2012Metric | R1, R2, R4, R5 |
Sunboard design files
The KiCad project lives in the seanlim/sunboard repository on GitHub; these links point at the commit this page was built from.
Sunboard: common questions
What microcontroller does the Sunboard use?
The Sunboard is built around the ESP32_NODEMCU, from the ESP32 family.
How big is the Sunboard PCB?
The Sunboard measures 173.5 × 226.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sunboard?
319 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sunboard design files?
From the seanlim/sunboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sunboard design in my own project?
The repository has no license, so all rights stay with seanlim. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sunboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k