MosaicHAT

septentrio-gnss·mosaicHAT·KiCAD_files/HATv1.0.kicad_pcb

MosaicHAT PCB layout, top view — open source Raspberry Pi board by septentrio-gnss

About the MosaicHAT PCB

MosaicHAT is an open source Raspberry Pi PCB design by septentrio-gnss, published on GitHub. It is a 4-layer board measuring 65 × 56.5 mm, with 37 components from 20 distinct parts.

Its main chip is the 2223, from the Raspberry Pi family. Other key parts include the 410322, LD1117AS33TR, SN74AVC4T245PWR and SN74LVC1G126DRLR. By type, the board carries 9 diodes, 7 connectors, 7 capacitors, 5 resistors, 4 ICs and 2 jumpers.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

From the project

Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5

mosaicHAT: A GNSS HAT for Raspberry PI Author: Jamal Sa'd Maintainer: (Septentrio gnss github user) External website: https://github.com/septentrio-gnss/mosaicHAT License: Creative Commons Attribution Share-Alike License. and Open Source HW Available for purchase here: https://www.ardusimple.com/product/septentrio-mosaichat/

Click to watch this video introducing mosaicHAT

MosaicHAT, from the project README
From the project README

Main components on the MosaicHAT

MosaicHAT bill of materials (BOM)

37 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
410322
mosaic-X5
U1
1
LD1117AS33TR
U2
1
SN74AVC4T245PWR
SN74AVC4T245PW
U3
1
SN74LVC1G126DRLR
U4
2
132136
Conn_Coaxial
J1, J2
1
1050170001
USB_B_Micro
J3
1
2223
raspberrypi_hat_OX40HAT
J4
1
61300411121
Conn_01x04_Male
J5
1
61300611121
Conn_01x06_Male
J6
1
61300211121
Conn_01x02_Male
J7
1
ECMF02-2AMX6
FL1
2
2PH1-03-UA
Jumper_NC_Dual
JP1, JP2
3
MBRX120LF-TP
D1, D2, D3
5
751-1156-1
LED
D4, D5, D6, D7, D8
1
SESD0402X1BN-0010-098
D_TVS
D9
2
744786139A
39nH
L1, L2
4
CC0603KRX7R6BB104
100nF
C1, C3, C4, C5
2
CC0603KRX5R6BB106
10uF
C2, C6
1
un-assembled
C7
5
ERJ-3EKF3300V
R330
R1, R2, R3, R4, R5

MosaicHAT design files

The KiCad project lives in the septentrio-gnss/mosaicHAT repository on GitHub; these links point at the commit this page was built from.

MosaicHAT: common questions

What microcontroller does the MosaicHAT use?

The MosaicHAT is built around the 2223, from the Raspberry Pi family.

How big is the MosaicHAT PCB?

The MosaicHAT measures 65 × 56.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the MosaicHAT?

37 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MosaicHAT design files?

From the septentrio-gnss/mosaicHAT repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the MosaicHAT design in my own project?

The repository has no license, so all rights stay with septentrio-gnss. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MosaicHAT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards