6 open source boards using the LD1117AS33TR
Real designs built with the LD1117AS33TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
MosaicHAT
septentrio-gnss
65 × 56.5 mm37 parts4LNo license63ESP8266
MIST.1010
UzixLS
100 × 100 mm259 parts2LMIT43Raspberry Pi
MosaicHAT-Station
taroz
85 × 56.5 mm45 parts4LNo license34MosaicBoard
taroz
73 × 55 mm61 parts4LNo license7STM32
Boardoza VL53L7CX Multizone ToF Depth Sensing Eval Board
Boardoza
40.3 × 40.3 mm59 parts2LCC-BY-SA-4.00Raspberry Pi
MosaicCore HAT (1)
MAHESH-THILAK-K
65 × 56.5 mm37 parts4LApache-2.00
How designs wire the LD1117AS33TR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LD1117AS33TR connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
- Pin 4 is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 3.3V 83% · a signal 17% |
|
| VIpin 3 | Connected to: 5V 83% · a signal 17% |
|
| Pin 4 | Connected to: Not connected 80% · a signal 20% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MosaicHAT by septentrio-gnss, MIST.1010 by UzixLS, MosaicHAT-Station by taroz and MosaicBoard by taroz.
The LD1117AS33TR in open source designs
The gallery holds 6 open source boards using the LD1117AS33TR from 6 GitHub repositories; a typical one measures about 69 × 56.5 mm and carries around 52 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is MosaicHAT by septentrio-gnss.
Parts used alongside the LD1117AS33TR
Microcontrollers on boards using the LD1117AS33TR
What boards using the LD1117AS33TR are built for
LD1117AS33TR: common questions
Where can I find a LD1117AS33TR reference design?
Each of the 6 boards on this page is a real design using the LD1117AS33TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LD1117AS33TR VI pin?
The VI pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the LD1117AS33TR.
How is the LD1117AS33TR pin 4 connected?
Pin 4 is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 6 open source designs using the LD1117AS33TR.
What parts are used alongside the LD1117AS33TR?
The 410322, SN74AVC4T245PWR and SN74LVC1G126DRLR appear in the most repositories here.
Which microcontrollers do boards using the LD1117AS33TR use?
Most are built on Raspberry Pi (3), ESP8266 (1) and STM32 (1).
How big is a typical board using the LD1117AS33TR?
The median is 69 × 56.5 mm, and 33% are two-layer designs.
What is the most popular open source board using the LD1117AS33TR?
By GitHub stars, MosaicHAT by septentrio-gnss, with 63 stars.
Can I simulate one of these boards using the LD1117AS33TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.