13 open source boards using the SN74AVC4T245PWR

Real designs built with the SN74AVC4T245PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the SN74AVC4T245PWR

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the SN74AVC4T245PWR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF).
  • The VCCB pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 10 µF).
  • The 2OE pin is tied to GND on 10 of 11 designs.
  • The 1OE pin is tied to GND on 10 of 11 designs.
VCCApin 1Connected to: 1.8V 64% · a signal 36%
  • Decoupling capacitor on 100% · 100 nF (13), 1 µF (1)
2A2pin 7Connected to: Not connected 64% · a signal 36%
GNDpin 8, 9Connected to: GND 100%
2B1pin 11Connected to: A connector 27% · not connected 18%
  • Series resistor on 36% · 0 Ω (1), 22 Ω (1)
1B2pin 12Connected to: A connector 45% · not connected 18%
  • Pull-up to 3.3V on 36% · 10 kΩ (3), 100 kΩ (1)
1B1pin 13Connected to: A connector 45%
  • Pull-up to 3.3V on 36% · 10 kΩ (3), 100 kΩ (1)
2OEpin 14Connected to: GND 91%
1OEpin 15Connected to: GND 91%
VCCBpin 16Connected to: 3.3V 91%
  • Decoupling capacitor on 100% · 100 nF (12), 10 µF (3), 1 µF (1)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ovc2 stereo by osrf, MosaicHAT by septentrio-gnss, MosaicHAT-Station by taroz and FMC MIPI by VideoGPU.

The SN74AVC4T245PWR in open source designs

The gallery holds 13 open source boards using the SN74AVC4T245PWR from 11 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 237 components.

92% use four copper layers or more, and 23% carry an open source license.

The most starred is Ovc2 stereo by osrf.

Microcontrollers on boards using the SN74AVC4T245PWR

SN74AVC4T245PWR: common questions

Where can I find a SN74AVC4T245PWR reference design?

Each of the 13 boards on this page is a real design using the SN74AVC4T245PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74AVC4T245PWR VCCA pin?

The VCCA pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the SN74AVC4T245PWR.

What decoupling capacitors do designs use on the SN74AVC4T245PWR VCCB pin?

The VCCB pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the SN74AVC4T245PWR.

How is the SN74AVC4T245PWR 2OE pin connected?

The 2OE pin is tied to GND on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the SN74AVC4T245PWR.

What parts are used alongside the SN74AVC4T245PWR?

The SN74LVC8T245PWR, 410322, AMC7823IRTAT, AT24C64D-SSHM-T and LD1117AS33TR appear in the most repositories here.

Which microcontrollers do boards using the SN74AVC4T245PWR use?

Most are built on Raspberry Pi (2), RP2040/RP2350 (1) and Silicon Labs (1).

How big is a typical board using the SN74AVC4T245PWR?

The median is 100 × 100 mm, and 8% are two-layer designs.

What is the most popular open source board using the SN74AVC4T245PWR?

By GitHub stars, Ovc2 stereo by osrf, with 207 stars.

Can I simulate one of these boards using the SN74AVC4T245PWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part