RP2350A QFN-60 Minimal Design Example
sequoia-hope·bluebuzz·design/reference/RP2350_60QFN_minimal.kicad_pcb
About the RP2350A QFN-60 Minimal Design Example PCB
RP2350A QFN-60 Minimal Design Example is an open source RP2040/RP2350 PCB design by sequoia-hope, published on GitHub. It is a 2-layer board measuring 52 × 51 mm, with 39 components from 26 distinct parts.
Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the BQ24074RGTR and TLV75533PDBVR. By type, the board carries 19 capacitors, 9 resistors, 4 connectors, 3 ICs, 2 switches and 1 crystal.
It belongs with the iot & wireless, power & battery and rf & radio designs in this gallery.
From the project
Live project page & interactive schematic / PCB / 3D viewer: (full-window board viewer, renders & 3D gallery)
Live project page & interactive schematic / PCB / 3D viewer: (full-window board viewer, renders & 3D gallery)
A Bluetooth vibrator controller: RP2350A + Raspberry Pi Radio Module 2 (the first board, an nRF52840 module, is abandoned and kept in archive/nrf52840/): Wi-Fi 4 and Bluetooth 5.2 Classic + LE (CYW43439), so the toy can be a Bluetooth A2DP audio sink (BTstack, in the Pico SDK) as well as a BLE-controlled device, and a USB audio device (TinyUSB) over its USB-C. 26 × 56.84 mm (squishpcb.dxf with r = 10 mm lower tip offset inward by 2.0 mm), 6 layers.** USB-C on the bottom tip is the…
Main components on the RP2350A QFN-60 Minimal Design Example
RP2350A QFN-60 Minimal Design Example bill of materials (BOM)
39 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2350A RP2350_60QFN | RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U1 |
| 1 | BQ24074RGTR NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | TLV75533PDBVR W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | ABM8-272-T3 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-31-M-12 USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
| 2 | Conn_02x18_Odd_Even | PinHeader_2x18_P2.54mm_Vertical | J2, J3 |
| 1 | SM03B-SRSS-TB | JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J4 |
| 1 | EVQPUC02K SW_Push | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | SW_Push | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW2 |
| 1 | AOTA-B201610S3R3-101-T 3.3u | L_pol_2016 | L1 |
| 3 | 10u | C_0805_2012Metric | C1, C5, C19 |
| 4 | CL05B104KO5NNNC 100n | C_0402_1005Metric | C2, C13, C14, C15 |
| 2 | 15p | C_0402_1005Metric | C3, C4 |
| 2 | 4.7u | C_0402_1005Metric_small_pads | C6, C7 |
| 4 | 100n | C_0402_1005Metric | C8, C16, C17, C18 |
| 1 | 4.7u | C_0402_1005Metric | C9 |
| 1 | CL10A106KP8NNNC 4.7u | C_0402_1005Metric | C10 |
| 2 | CL10A106KP8NNNC 100n | C_0402_1005Metric | C11, C12 |
| 1 | 0402WGF5101TCE DNF | R_0402_1005Metric | R1 |
| 1 | 0402WGF5101TCE 1k | R_0402_1005Metric | R2 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0402WGF270JTCE 1k | R_0402_1005Metric | R4 |
| 1 | 33 | R_0402_1005Metric | R5 |
| 1 | 1k | R_0402_1005Metric | R6 |
| 2 | 27 | R_0402_1005Metric | R7, R8 |
| 1 | DNF | R_0402_1005Metric | R9 |
| 1 | 0402WGF1781TCE 0 | R_0402_1005Metric | R10 |
RP2350A QFN-60 Minimal Design Example design files
The KiCad project lives in the sequoia-hope/bluebuzz repository on GitHub; these links point at the commit this page was built from.
RP2350A QFN-60 Minimal Design Example: common questions
What microcontroller does the RP2350A QFN-60 Minimal Design Example use?
The RP2350A QFN-60 Minimal Design Example is built around the RP2350A, from the RP2040/RP2350 family.
How big is the RP2350A QFN-60 Minimal Design Example PCB?
The RP2350A QFN-60 Minimal Design Example measures 52 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RP2350A QFN-60 Minimal Design Example?
39 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RP2350A QFN-60 Minimal Design Example design files?
From the sequoia-hope/bluebuzz repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the RP2350A QFN-60 Minimal Design Example design in my own project?
The repository has no license, so all rights stay with sequoia-hope. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RP2350A QFN-60 Minimal Design Example without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in bluebuzz
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k