60 open source boards using the BQ24074RGTR

Real designs built with the BQ24074RGTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

60 boardsClear filters|Most starred

How designs wire the BQ24074RGTR

Read from the KiCad layouts of 31 open source designs, one per repository: what each pin of the BQ24074RGTR connects to, and the resistors, capacitors and other passives placed on it.

  • The ILIM_12 pin has a resistor to GND on 29 of 31 designs, most often 1.5 kΩ (then 1.1 kΩ).
  • The ISET_16 pin has a resistor to GND on 29 of 31 designs, most often 1.8 kΩ (then 1.13 kΩ).
  • The TS_1 pin has a resistor to GND on 22 of 31 designs, most often 10 kΩ.
  • The BAT_2 pin has a decoupling capacitor on 22 of 31 designs, most often 10 µF (then 4.7 µF).
TS_1pin 1Connected to: A connector 32%
  • Resistor to GND on 71% · 10 kΩ (21)
BAT_2pin 2Connected to: VBAT 55% · a signal 45%
  • Decoupling capacitor on 71% · 10 µF (13), 4.7 µF (9), 100 nF (5)
BAT_3pin 3Connected to: VBAT 55% · a signal 42%
  • Decoupling capacitor on 68% · 10 µF (13), 4.7 µF (8), 100 nF (5)
CE_4pin 4Connected to: GND 77% · a signal 23%
PGOOD_7pin 7Connected to: The microcontroller 23% · not connected 23%
  • Pull-up to 3.3V on 42% · 100 kΩ (9), 10 kΩ (2), 3.3 kΩ (1)
VSS_8pin 8Connected to: GND 94%
CHG_9pin 9Connected to: The microcontroller 23%
  • Pull-up to 3.3V on 42% · 100 kΩ (8), 10 kΩ (3), 3.3 kΩ (1)
ILIM_12pin 12Connected to: Signal 97%
  • Resistor to GND on 94% · 1.5 kΩ (5), 1.1 kΩ (5), 1.18 kΩ (2)
IN_13pin 13Connected to: VBUS 71% · a signal 29%
TMR_14pin 14Connected to: Signal 45% · not connected 29% · GND 23%
  • Resistor to GND on 42% · 47 kΩ (3), 46.4 kΩ (2), 68.1 kΩ (2)
ITERM_15pin 15Connected to: Not connected 58% · a signal 42%
  • Resistor to GND on 39% · 4.12 kΩ (3), 3.01 kΩ (3), 3 kΩ (3)
ISET_16pin 16Connected to: Signal 100%
  • Resistor to GND on 94% · 1.8 kΩ (4), 1.13 kΩ (3), 1 kΩ (3)
VSS_17pin 17Connected to: GND 97%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open motorcycle intercom by d3vv3, Skysweep32 rev c by bobberdolle1, Chaac ng by alvarop and PocketLab-Card by Jebroa774.

The BQ24074RGTR in open source designs

The gallery holds 60 open source boards using the BQ24074RGTR from 32 GitHub repositories; a typical one measures about 85 × 65 mm and carries around 93 components.

83% use four copper layers or more, and 47% carry an open source license.

The most starred is Open motorcycle intercom by d3vv3.

Microcontrollers on boards using the BQ24074RGTR

BQ24074RGTR: common questions

Where can I find a BQ24074RGTR reference design?

Each of the 60 boards on this page is a real design using the BQ24074RGTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the BQ24074RGTR ILIM_12 pin?

The ILIM_12 pin has a resistor to GND on 29 of 31 designs, most often 1.5 kΩ (then 1.1 kΩ). Counted from the KiCad layouts of 31 open source designs using the BQ24074RGTR.

What resistor goes on the BQ24074RGTR ISET_16 pin?

The ISET_16 pin has a resistor to GND on 29 of 31 designs, most often 1.8 kΩ (then 1.13 kΩ). Counted from the KiCad layouts of 31 open source designs using the BQ24074RGTR.

What resistor goes on the BQ24074RGTR TS_1 pin?

The TS_1 pin has a resistor to GND on 22 of 31 designs, most often 10 kΩ. Counted from the KiCad layouts of 31 open source designs using the BQ24074RGTR.

What parts are used alongside the BQ24074RGTR?

The USBLC6-2SC6, TPS61023DRLR, ESP32-S3-WROOM-1-N16R8, MAX17048G+T10 and TPS63001DRCR appear in the most repositories here.

Which microcontrollers do boards using the BQ24074RGTR use?

Most are built on ESP32 (21), RP2040/RP2350 (14), NXP (8) and Nordic nRF (5).

How big is a typical board using the BQ24074RGTR?

The median is 85 × 65 mm, and 17% are two-layer designs.

What is the most popular open source board using the BQ24074RGTR?

By GitHub stars, Open motorcycle intercom by d3vv3, with 68 stars.

Can I simulate one of these boards using the BQ24074RGTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part