PCB BatteryCharger
sercami97·EstacionMeteorologica·EDITABLES/PCB/LATEST/PCB_final/PCB_BatteryCharger.kicad_pcb
About the PCB BatteryCharger
PCB BatteryCharger is an open source PCB design by sercami97, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 55 components from 37 distinct parts.
Other key parts include the CN3791, FS312F-G, MT3608 and TD1519AMR. By type, the board carries 17 capacitors, 14 resistors, 5 diodes, 4 ICs, 4 transistors and 3 LEDs.
It belongs with the power & battery designs in this gallery.
From the project
Open source proyect for low cost weather station
El objetivo del proyecto es diseñar una estación meteorológica inteligente. Esto es, que sea capaz de usar protocolos de IoT para el almacenamiento de los datos en un servidor remoto y ser autosostenible (Energía solar). Además, se espera que los diseños sean fácilmente replicables y tengan un bajo costo. Esto con el objetivo de ser más acesible para las comunidades campesinas y lograr un mayor impacto.
Main components on the PCB BatteryCharger
PCB BatteryCharger bill of materials (BOM)
55 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CN3791 | SSOP-10_L4.9-W3.9-P1.00-LS6.0-BL | U1 |
| 1 | FS312F-G | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U3 |
| 1 | MT3608 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U11 |
| 1 | TD1519AMR | SOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U12 |
| 1 | FS8205 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | Q2 |
| 3 | AO3401A | SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | Q3, Q5, Q6 |
| 2 | XH-2A | CONN-TH_XH-2A | CN2, CN3 |
| 3 | CURR | HDR-TH_2P-P2.54-V-F | H1, H2, H3 |
| 1 | RED | LED0805-RD | LED1 |
| 1 | YELLOW | LED0805-RD | LED2 |
| 1 | BLUE | LED0603-R-RD | LED6 |
| 2 | SS34 | SMC_L7.1-W6.2-LS8.1-RD | D1, D4 |
| 1 | 0 | SOD-128_L3.7-W2.5-LS4.7-RD | D2 |
| 2 | PMEG3020EP,115 | SOD-128_L3.7-W2.5-LS4.7-RD | D3, D5 |
| 1 | 82uH | IND-SMD_L13.8-W12.6_SMMS1360 | L2 |
| 1 | 22uH | IND-SMD_L7.0-W6.8 | L4 |
| 1 | 47uH | IND-SMD_L6.0-W6.0 | L5 |
| 3 | 10uF | CAP-SMD_BD4.0-L4.3-W4.3-RD | C4, C12, C22 |
| 4 | 4.7uF | C0805 | C5, C6, C20, C21 |
| 1 | 220nF | C1206 | C7 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100nF | C0603 | C8, C13, C23, C26 |
| 1 | 470nF | C0603 | C14 |
| 1 | 470uF | CAP-SMD_BD8.0-L8.3-W8.3-FD | C18 |
| 1 | 330uF | CAP-SMD_BD10.0-L10.3-W10.3-FD | C19 |
| 1 | 33nF | C0603 | C24 |
| 1 | 10nF | C0603 | C25 |
| 1 | 15K | RES-ADJ-SMD_VG039NCHXTB153 | R1 |
| 2 | 2K | R0603 | R2, R35 |
| 1 | 100K | R0603 | R3 |
| 1 | 5.6K | R0603 | R4 |
| 3 | 1K | R0603 | R5, R15, R23 |
| 1 | 0.05 | R2512 | R6 |
| 1 | 120 | R0805 | R9 |
| 1 | 76.8K | R0603 | R17 |
| 1 | 16K | R0603 | R18 |
| 1 | 7.5K | R0603 | R24 |
| 1 | 100 | R0603 | R34 |
PCB BatteryCharger design files
The KiCad project lives in the sercami97/EstacionMeteorologica repository on GitHub; these links point at the commit this page was built from.
PCB BatteryCharger: common questions
How big is the PCB BatteryCharger?
The PCB BatteryCharger measures 100 × 100 mm and has 2 copper layers.
How many components are on the PCB BatteryCharger?
55 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB BatteryCharger design files?
From the sercami97/EstacionMeteorologica repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PCB BatteryCharger design in my own project?
The repository has no license, so all rights stay with sercami97. Use it as a reference, and ask the author before reusing the design.
More boards in EstacionMeteorologica
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k