ESP32 Low Power Development Board
ShalihuddinAlFatah·ESP32_Low_Power_Development_Board
About the ESP32 Low Power Development Board
ESP32 Low Power Development Board is an open source ESP32 PCB design by ShalihuddinAlFatah, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 35 × 54.5 mm, with 20 components from 10 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 6 capacitors, 4 resistors, 3 transistors, 3 connectors, 2 ICs and 2 switches.
It belongs with the dev boards & breakouts, iot & wireless and test & measurement designs in this gallery.
From the project
Simple ESP32 development board specifically designed for low power project
Simple ESP32 development board specifically designed for low power project. 1. This PCB doesn't have on-board USB to TTL and any LED light. It allows to accurately measure current consumption of your low power IoT project. 2. Each I/O has 2 pin headers, one for connecting to peripherals and one for troubleshooting purpose (Logic analyzer, oscilloscope, etc). 3. Clearance and creepage minimum 0.2mm (IPC-2221A). 4. Boot and reset button.
Main components on the ESP32 Low Power Development Board
ESP32 Low Power Development Board bill of materials (BOM)
20 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32E | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 2 | SS8050 | SOT-23 | Q1, Q2 |
| 1 | IRLML6401 | SOT-23 | Q3 |
| 1 | J8_Header/01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 2 | J8_Header/02x19_Male | PinHeader_2x19_P2.54mm_Vertical | J2, J3 |
| 2 | TL1018AAAF160QG | TL1018AAAF160QG | S1, S2 |
| 3 | 22uF/10V(20%) | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 3 | 0.1uF/50V(10%) | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6 |
| 4 | 10K(5%) | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
ESP32 Low Power Development Board design files
The KiCad project lives in the ShalihuddinAlFatah/ESP32_Low_Power_Development_Board repository on GitHub; these links point at the commit this page was built from.
ESP32 Low Power Development Board: common questions
What microcontroller does the ESP32 Low Power Development Board use?
The ESP32 Low Power Development Board is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the ESP32 Low Power Development Board?
The ESP32 Low Power Development Board measures 35 × 54.5 mm, has 2 copper layers and is 1.2 mm thick.
How many components are on the ESP32 Low Power Development Board?
20 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32 Low Power Development Board design files?
From the ShalihuddinAlFatah/ESP32_Low_Power_Development_Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32 Low Power Development Board design in my own project?
Yes, under the terms of its Apache-2.0 license, which ShalihuddinAlFatah chose for the repository.
Can I test firmware for the ESP32 Low Power Development Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k