Enviro node esp32s3
sharanyasrinivas-jfk·enviro-node-esp32s3·hardware/schematic/iot-sensor-board.kicad_sch

About the Enviro node esp32s3 PCB
Enviro node esp32s3 is an open source ESP32 PCB design by sharanyasrinivas-jfk, published on GitHub. It is a board, with 9 components from 8 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R2, from the ESP32 family. Other key parts include the AP2112K-3.3TRG1 and USBLC6-2SC6. By type, the board carries 3 ICs, 3 capacitors, 1 connector, 1 diode and 1 resistor.
It belongs with the iot & wireless, sensors and power & battery designs in this gallery.
From the project
ESP32-S3 IoT environmental sensor board: temperature, humidity, pressure, and air quality over Wi-Fi and BLE.
ESP32-S3 IoT environmental sensor board: temperature, humidity, pressure, and air quality over Wi-Fi and BLE.
Overview · Specs · Design highlights · Repository contents · Known issues · Credits
EnviroNode is a compact 4-layer, USB-C powered sensor node built around the ESP32-S3-WROOM-1. Three I2C sensors share one bus: a BMP280 (pressure and temperature), an SHT40 (humidity), and a CCS811 (eCO2 and TVOC). The design targets JLCPCB manufacturing and LCSC-sourced parts.
Main components on the Enviro node esp32s3
Enviro node esp32s3 bill of materials (BOM)
9 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8R2 ESP32-S3-WROOM-1 Espressif | U1 | |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 Diodes Inc | U2 | |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U3 |
| 1 | USB4105-GF-A USB_C_Receptacle GCT | USB_C_Receptacle_GCT_USB4105 | J1 |
| 1 | 19-217/GHC-YR1S2/3T Green 0402 Everlight | D1 | |
| 2 | CL10A106KP8NNNC 10µF/10V X5R Samsung | C_0603_1608Metric | C1, C2 |
| 1 | CL05B104KO5NNNC 100nF/16V X7R Samsung | C3 | |
| 1 | RC0402FR-071K5L 1.5kΩ Yageo | R1 |
Enviro node esp32s3 design files
The KiCad project lives in the sharanyasrinivas-jfk/enviro-node-esp32s3 repository on GitHub; these links point at the commit this page was built from.
Enviro node esp32s3: common questions
What microcontroller does the Enviro node esp32s3 use?
The Enviro node esp32s3 is built around the ESP32-S3-WROOM-1-N8R2, from the ESP32 family.
How many components are on the Enviro node esp32s3?
9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Enviro node esp32s3 design files?
From the sharanyasrinivas-jfk/enviro-node-esp32s3 repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Enviro node esp32s3 design in my own project?
The repository has no license, so all rights stay with sharanyasrinivas-jfk. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Enviro node esp32s3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k