Devboard
sharkie-0000·devboard·kicad/devboard.kicad_pcb
About the Devboard PCB
Devboard is an open source RP2040/RP2350 PCB design by sharkie-0000, published on GitHub. It is a 2-layer board measuring 21 × 51 mm, with 34 components from 17 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-330xxTT and W25Q16JVUXIQ. By type, the board carries 17 capacitors, 7 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This project is a custom development board that uses the RP2040 microcontroller. It is designed to be small and easily programmable for electronics and embedded projects.
This project is a custom development board that uses the RP2040 microcontroller. It is designed to be small and easily programmable for electronics and embedded projects.
The board comprises a USB-C connection, external flash memory, 3.3v voltage regulater and headers.
The RP2040 acts as the main controller for the board. It will run the programme stored on the external flash memory.

Main components on the Devboard
Devboard bill of materials (BOM)
34 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | MCP1700x-330xxTT | SOT-23 | U2 |
| 1 | W25Q16JVUXIQ | Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
| 1 | 12 MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D2 |
| 2 | 1uF | C_0402_1005Metric | C1, C10 |
| 11 | 0.1uF | C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C9 +3 |
| 2 | 10uF | C_0402_1005Metric | C13, C14 |
| 2 | 15pF | C_0402_1005Metric | C15, C16 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
| 2 | 1k | R_0402_1005Metric | R3, R5 |
| 1 | 10k | R_0402_1005Metric | R4 |
| 2 | 27 | R_0402_1005Metric | R6, R7 |
Devboard design files
The KiCad project lives in the sharkie-0000/devboard repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/devboard.kicad_pcb
- Schematickicad/devboard.kicad_sch
Devboard: common questions
What microcontroller does the Devboard use?
The Devboard is built around the RP2040, from the RP2040/RP2350 family.
How big is the Devboard PCB?
The Devboard measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Devboard?
34 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Devboard design files?
From the sharkie-0000/devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Devboard design in my own project?
The repository has no license, so all rights stay with sharkie-0000. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k