RadRail-Badge
SharKingStudios·RadRail-Badge·PCB/RadRail Badge.kicad_pcb
About the RadRail-Badge PCB
RadRail-Badge is an open source ESP32 PCB design by SharKingStudios, published on GitHub. It is a 2-layer board measuring 75 × 100 mm, with 146 components from 12 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 120 LEDs, 8 switches, 8 capacitors, 5 resistors, 2 ICs and 2 connectors.
It belongs with the wearables and displays & leds designs in this gallery.
From the project
My personal badge created for the Fallout.
A train-control PCB badge where RGB LEDs become trains moving through a virtual rail network.
RadRail is an interactive PCB badge inspired by hardware badge games and model railroads. The board lays out a miniature rail network using addressable RGB LEDs and train-track silkscreen artwork. The intended experience is to manually drive trains, switch routes, and watch movement around the board, with an autonomous/demo mode for when nobody is actively controlling it.
Main components on the RadRail-Badge
RadRail-Badge bill of materials (BOM)
146 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 Advanced Monolithic Systems | SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U1 |
| 1 | ESP32-C3-WROOM-02-N4 ESPRESSIF(乐鑫) | BULETM-SMD_ESPRESSIF_ESP32-C3-WROOM-02-N4-4MB | U2 |
| 1 | BOARD_LINK_UPPER | SMD_BOARD_LINK_5P | J1 |
| 1 | BOARD_LINK_LOWER_MIRRORED | SMD_BOARD_LINK_5P_MIRRORED | J2 |
| 8 | TS-1187A-B-A-B XKB Connection(中国星坤) | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 1 | TYPE-C 16PIN 2MD(073) TYPE-C 16PIN 2MD SHOU HAN(首韩) | USB-C-SMD_TYPE-C-16PIN-2MD-073 | USB1 |
| 120 | TX1812RWBA-F10 TCWIN(天成) | LED-SMD_4P-L4.0-W1.7-R | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +112 |
| 6 | 1UF 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C6, C7, C8 |
| 2 | 10UF 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 5.1K 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 2 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5 |
| 1 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
RadRail-Badge design files
The KiCad project lives in the SharKingStudios/RadRail-Badge repository on GitHub; these links point at the commit this page was built from.
RadRail-Badge: common questions
What microcontroller does the RadRail-Badge use?
The RadRail-Badge is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the RadRail-Badge PCB?
The RadRail-Badge measures 75 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RadRail-Badge?
146 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RadRail-Badge design files?
From the SharKingStudios/RadRail-Badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RadRail-Badge design in my own project?
The repository has no license, so all rights stay with SharKingStudios. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RadRail-Badge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k