Rp gameboy cartridge hw

shilga·rp-gameboy-cartridge-hw·KiCad/V2/GameboyCartridgeV2.1/GameboyCartridgeV2.1.kicad_pcb

Rp gameboy cartridge hw PCB layout, top view — open source RP2040/RP2350 board by shilga

About the Rp gameboy cartridge hw PCB

Rp gameboy cartridge hw is an open source RP2040/RP2350 PCB design by shilga, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 52.8 × 61.2 mm, with 68 components from 34 distinct parts.

Its main chip is the C42415655, from the RP2040/RP2350 family. Other key parts include the C15999, C82317, C5375118, C627708 and C51118. By type, the board carries 28 capacitors, 17 resistors, 8 diodes, 7 ICs, 2 crystals and 2 connectors.

It belongs with the retro computing designs in this gallery, and the repository also holds 2 earlier revisions of it.

From the project

You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.

Main components on the Rp gameboy cartridge hw

C15999C82317C42415655C5375118C627708C51118C53406

Rp gameboy cartridge hw bill of materials (BOM)

68 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C15999
USBLC6-2P6
U1
1
C82317
W25Q16JVSSIQ
U2
1
C42415655
RP2350_80QFN
U3
1
C5375118
W956A8MBYA5I
U4
1
C627708
MCP79510
U5
1
C51118
AP2112K-3.3
U6
1
C53406
TXB0108PW
U7
1
C8548
CJ2302
Q1
1
C668845
12MHz
Y1
1
C97602
32.768kHz
Y2
1
C2927037
USB_C_Receptacle_USB2.0
J1
1
C719027
Micro_SD_Card_Det2
J2
1
C6997853
Battery_Cell
BT1
1
C2649911
Polyfuse
F1
1
C2761795
WS2812B
D1
2
C669022
D_Schottky
D2, D3
5
AOZ8809DI-05
D4, D5, D6, D7, D8
1
C42411119
3.3u
L1
7
100NF
100nF
C1, C18, C20, C21, C22, C23, C24
2
4.7U
4.7u
C2, C3
Show 14 more
QtyPartRefs
2
C1644
15pF
C4, C5
2
4.7U
4.7u
C6, C8
11
100N
100n
C7, C9, C10, C11, C12, C13, C14, C15 +3
2
1UF
1uF
C25, C26
1
C1644
4.3.pF
C27
1
C1644
4.3pF
C28
2
0R
R1, R2
6
10K
10k
R3, R6, R12, R14, R15, R16
2
5K1
5k1
R4, R5
1
33
R7
2
1k
R8, R13
2
27R
R9, R10
1
10R
R11
1
10k
R17

Rp gameboy cartridge hw design files

The KiCad project lives in the shilga/rp-gameboy-cartridge-hw repository on GitHub; these links point at the commit this page was built from.

Rp gameboy cartridge hw: common questions

What microcontroller does the Rp gameboy cartridge hw use?

The Rp gameboy cartridge hw is built around the C42415655, from the RP2040/RP2350 family.

How big is the Rp gameboy cartridge hw PCB?

The Rp gameboy cartridge hw measures 52.8 × 61.2 mm, has 4 copper layers and is 0.7912 mm thick.

How many components are on the Rp gameboy cartridge hw?

68 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rp gameboy cartridge hw design files?

From the shilga/rp-gameboy-cartridge-hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rp gameboy cartridge hw design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which shilga chose for the repository.

Can I test firmware for the Rp gameboy cartridge hw without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Earlier revisions in the repo: GameboyCartridgeV1.3, GameboyCartridgeV1.1

Similar boards