XiZi-RP2040
shreejita56·XiZi-RP2040·PCB/XiZi Rp2040.kicad_pcb
About the XiZi-RP2040 PCB
XiZi-RP2040 is an open source RP2040/RP2350 PCB design by shreejita56, published on GitHub. It is a 2-layer board measuring 22.4 × 22.1 mm, with 26 components from 17 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-330xxTT and W25Q16JVUXIQ TR. By type, the board carries 9 capacitors, 8 resistors, 3 ICs, 3 connectors, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
So I made on a Dev-board based on Rp-2040 with similar size constrain like Xiao-Rp2040. So I used the smallest size of resistors and capacitors . It has access to a total of 14 GPI0 and 4 Analog . 4 Pins act as dual purpose. It holds an USB-C Type interference for communication a
So I made on a Dev-board based on Rp-2040 with similar size constrain like Xiao-Rp2040. So I used the smallest size of resistors and capacitors . It has access to a total of 14 GPI0 and 4 Analog . 4 Pins act as dual purpose. It holds an USB-C Type interference for communication and 3.3V Voltage regulator and Crystal oscillator , Flash Memory , boot Switch and more .
Main components on the XiZi-RP2040
XiZi-RP2040 bill of materials (BOM)
26 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | MCP1700x-330xxTT | SOT-23 | U2 |
| 1 | W25Q16JVUXIQ TR | Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U4 |
| 1 | 12 MHz | Crystal_SMD_1210-4Pin_1.2x1.0mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 2 | Conn_01x08_Pin | Molex_SL_171971-0008_1x08_P2.54mm_Vertical | J2, J3 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | LED | LED_0201_0603Metric | D1 |
| 1 | 1uF | C_0201_0603Metric | C1 |
| 4 | 0.1uF | C_0201_0603Metric | C2, C3, C4, C17 |
| 2 | 10uF | C_0201_0603Metric | C13, C14 |
| 2 | 33pF | C_0201_0603Metric | C15, C16 |
| 2 | 33 R | R_0201_0603Metric | R1, R2 |
| 2 | 5.1 K | R_0201_0603Metric | R3, R8 |
| 1 | 5.1K | R_0201_0603Metric | R4 |
| 2 | 1K | R_0201_0603Metric | R5, R6 |
| 1 | 10K | R_0201_0603Metric | R7 |
XiZi-RP2040 design files
The KiCad project lives in the shreejita56/XiZi-RP2040 repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/XiZi Rp2040.kicad_pcb
- SchematicPCB/XiZi Rp2040.kicad_sch
XiZi-RP2040: common questions
What microcontroller does the XiZi-RP2040 use?
The XiZi-RP2040 is built around the RP2040, from the RP2040/RP2350 family.
How big is the XiZi-RP2040 PCB?
The XiZi-RP2040 measures 22.4 × 22.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XiZi-RP2040?
26 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the XiZi-RP2040 design files?
From the shreejita56/XiZi-RP2040 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the XiZi-RP2040 design in my own project?
The repository has no license, so all rights stay with shreejita56. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the XiZi-RP2040 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k