ESP32NANO
Shubhkr08·ESP32NANO·ESP32NANO/PCB/Neowings(PCB).kicad_pcb
About the ESP32NANO PCB
ESP32NANO is an open source ESP32 PCB design by Shubhkr08, published on GitHub. It is a 2-layer board measuring 24.5 × 27.4 mm, with 17 components from 9 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 6 capacitors, 4 resistors, 2 ICs, 2 connectors and 2 switches.
It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.
From the project
I made a custom Esp32 board based on ESP32-S3-WROOM-1 , it has a USB type C and i tried to keep the size of the board as small as possible and to have as much as useful pins available on the board.
- DigiKey Shipping: $20.00 - PCB + Stencil + Shipping: $28.81 (JLCPCB) - PCB Manufacturer: JLCPCB — https://jlcpcb.com/
- Components Total: $21.72 - Shipping + PCB: $48.81 - Estimated Total Cost: $70.53 USD ## Schematic & PCB
Main components on the ESP32NANO
ESP32NANO bill of materials (BOM)
17 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Conn_01x17_Pin | PinHeader_1x17_P1.00mm_Vertical | J3 |
| 1 | Conn_01x16_Pin | PinHeader_1x16_P1.00mm_Vertical | IO1 |
| 2 | SW_Push | SW_SPST_PTS810 | SW1, SW2 |
| 2 | C_Polarized | CP_EIA-3528-21_Kemet-B | C1(22uf)1, C2(10uf)1 |
| 4 | C | C_0805_2012Metric | C3(22uf), C4(100nf), C5(1uf), C6(100nf)1 |
| 4 | R | R_0805_2012Metric | R1(10k), R2(100R)1, R3(5.1k)1, R4(5.1k) |
ESP32NANO design files
The KiCad project lives in the Shubhkr08/ESP32NANO repository on GitHub; these links point at the commit this page was built from.
ESP32NANO: common questions
What microcontroller does the ESP32NANO use?
The ESP32NANO is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the ESP32NANO PCB?
The ESP32NANO measures 24.5 × 27.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32NANO?
17 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32NANO design files?
From the Shubhkr08/ESP32NANO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32NANO design in my own project?
The repository has no license, so all rights stay with Shubhkr08. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32NANO without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k