Omega

Shubhkr08·Omega·OMEGA (Custom Rp2040 Chip MicroPad)/PCB/Custom Rp2040 Micropad( Omega).kicad_pcb

Omega PCB layout, top view — open source RP2040/RP2350 board by Shubhkr08

About the Omega PCB

Omega is an open source RP2040/RP2350 PCB design by Shubhkr08, published on GitHub. It is a 2-layer board measuring 58 × 74 mm, with 51 components from 18 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-330xxTT and W25Q16JVUXIQ TR. By type, the board carries 17 capacitors, 11 switches, 10 diodes, 7 resistors, 3 ICs and 2 connectors.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

This is a Custom Rp2040 Chip Based MicroPad , It has 9 Switches , a roter encode and a oled screen . We used matrix for switches so it uses less gpio pins and it has 4 layers the rotor key is used to change the layers which is displaced on the screen so in total we have keys outp

This is a Custom Rp2040 Chip Based MicroPad , It has 9 Switches , a roter encode and a oled screen . We used matrix for switches so it uses less gpio pins and it has 4 layers the rotor key is used to change the layers which is displaced on the screen so in total we have keys output 9x4=36 + 4 outputs from rotor = 40 Outputs. ## Features

- Based on RP2040 Chip - Has total 40 Outputs ## Firmware - Firmware is based on QMK. ### Schematic

Omega, from the project README
From the project README

Main components on the Omega

Omega bill of materials (BOM)

51 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
MCP1700x-330xxTT
U2
1
W25Q16JVUXIQ TR
U4
1
12 MHz
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
1
Conn_01x04_Pin
J2
1
SW_Push
SW1
1
RotaryEncoder_Switch_MP
SW2
9
SW_Push
SW4, SW5, SW6, SW7, SW8, SW9, SW13, SW14 +1
10
1N4148
D1, D4, D5, D6, D7, D8, D9, D10 +2
2
1uF
C1, C10
11
0.1uF
C2, C3, C4, C5, C6, C7, C8, C9 +3
2
10uF
C13, C14
2
33pF
C15, C16
2
5.1K
R1, R2
2
27
R3, R4
2
1K
R5, R6
1
10K
R7

Omega design files

The KiCad project lives in the Shubhkr08/Omega repository on GitHub; these links point at the commit this page was built from.

Omega: common questions

What microcontroller does the Omega use?

The Omega is built around the RP2040, from the RP2040/RP2350 family.

How big is the Omega PCB?

The Omega measures 58 × 74 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Omega?

51 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Omega design files?

From the Shubhkr08/Omega repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Omega design in my own project?

The repository has no license, so all rights stay with Shubhkr08. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Omega without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards