Code and ShortCircuits
shukranwambua-maker·Code_and_ShortCircuits
About the Code and ShortCircuits PCB
Code and ShortCircuits is an open source ESP32 PCB design by shukranwambua-maker, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 45 mm, with 29 components from 19 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the CH340C and AMS1117-3.3. By type, the board carries 10 resistors, 6 capacitors, 3 ICs, 3 connectors, 3 diodes and 2 transistors.
From the project
"Those who don't INNOVATE perish!!!!!" - Muchai Wambua
Ever wondered what an ESP32-WROOM-32D Development board entails???

Main components on the Code and ShortCircuits
Code and ShortCircuits bill of materials (BOM)
29 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32D | ESP32-WROOM-32D | U1 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | SS8050 | SOT-23 | Q1 |
| 1 | S8050 | SOT-23 | Q2 |
| 2 | Conn_01x15_Pin | PinHeader_1x15_P1.00mm_Vertical | J1, J3 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J2 |
| 1 | BOOT | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | EN | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
| 1 | 1N5817 | D_SOD-123 | D1 |
| 1 | RED LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | Blue LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | 100u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 3 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4 |
| 2 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 4 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R7, R8 |
| 2 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 2 | 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
Code and ShortCircuits design files
The KiCad project lives in the shukranwambua-maker/Code_and_ShortCircuits repository on GitHub; these links point at the commit this page was built from.
- LayoutESP32_WROOM_32D.kicad_pcb
- SchematicESP32_WROOM_32D.kicad_sch
Code and ShortCircuits: common questions
What microcontroller does the Code and ShortCircuits use?
The Code and ShortCircuits is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the Code and ShortCircuits PCB?
The Code and ShortCircuits measures 65 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Code and ShortCircuits?
29 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Code and ShortCircuits design files?
From the shukranwambua-maker/Code_and_ShortCircuits repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Code and ShortCircuits design in my own project?
Yes, under the terms of its MIT license, which shukranwambua-maker chose for the repository.
Can I test firmware for the Code and ShortCircuits without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k