Precision-Light-Sensor-AFE
shyver·Precision-Light-Sensor-AFE·kicad/photodiode_TIA/photodiode_TIA.kicad_pcb
About the Precision-Light-Sensor-AFE PCB
Precision-Light-Sensor-AFE is an open source PCB design by shyver, published on GitHub under the MIT license. It is a 2-layer board measuring 25 × 10 mm, with 8 components from 8 distinct parts.
Other key parts include the MCP6001R. By type, the board carries 3 capacitors, 2 resistors, 1 IC, 1 connector and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
Designed as a modular Analog Front-End (AFE), this board converts ambient light intensity into a clean, stable analog voltage (0–3.3V) suitable for direct sampling by microcontrollers (e.g., ESP32, STM32, Arduino) using a Transimpedance Amplifier (TIA) architecture.

Main components on the Precision-Light-Sensor-AFE
Precision-Light-Sensor-AFE bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6001R | SOT-23-5 | U1 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | BPW34 | Osram_DIL2_4.3x4.65mm_P5.08mm | D1 |
| 1 | 20P 20p | C_0201_0603Metric | C1 |
| 1 | 0.1µ | C_0201_0603Metric | C2 |
| 1 | 10N 10n | C_0201_0603Metric | C3 |
| 1 | 68K 68k | R_0201_0603Metric | R1 |
| 1 | 100 | R_0201_0603Metric | R2 |
Precision-Light-Sensor-AFE design files
The KiCad project lives in the shyver/Precision-Light-Sensor-AFE repository on GitHub; these links point at the commit this page was built from.
Precision-Light-Sensor-AFE: common questions
How big is the Precision-Light-Sensor-AFE PCB?
The Precision-Light-Sensor-AFE measures 25 × 10 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Precision-Light-Sensor-AFE?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Precision-Light-Sensor-AFE design files?
From the shyver/Precision-Light-Sensor-AFE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Precision-Light-Sensor-AFE design in my own project?
Yes, under the terms of its MIT license, which shyver chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956