Maria phono preamp
sibiryakov·maria-phono-preamp·kicad/Phono preamp.kicad_pcb
About the Maria phono preamp PCB
Maria phono preamp is an open source PCB design by sibiryakov, published on GitHub under the MIT license. It is a 2-layer board measuring 150 × 100 mm, with 115 components from 40 distinct parts.
Other key parts include the NE5532 and LM4562. By type, the board carries 58 resistors, 50 capacitors and 4 ICs.
It belongs with the audio designs in this gallery.
From the project
Moving magnet phono preamp Maria
Точность соответствия RIAA - 0.3 dB в среднем, 0.11 в интервале 125-8000 Гц, Поддерживаются только Moving Magnet (MM) картриджи, Усиление +30 dB, на частоте 1 kHz, Номинальное входное напряжение - 5 mV Входное сопротивление - 47 кОм Входная ёмкость - 100-470 пФ, впаивается пользователем Напряжение питания - +15В, -15В Потребляемый ток - ~100mA Максимальный уровень выходного сигнала 13В (25 dBu) THD на частоте 1 kHz - 0.004 % Шум, 1 kHz на уровне -120 dBu, 50hz -100dbu Взаимное проникновение каналов 1 kHz (0 dBu) -66 dBu
Main components on the Maria phono preamp
Maria phono preamp bill of materials (BOM)
115 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | NE5532 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U3 |
| 2 | LM4562 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 2 | Conn_Coaxial_x2 | RCA_8.3mm_CLIFF_FC68405_Horizontal | INPUT1, OUTPUT1 |
| 1 | DIN-3 | PinHeader_1x03_P2.54mm_Vertical | POWER1 |
| 2 | 100pF | C_Rect_L7.0mm_W4.5mm_P5.00mm | C1, C12 |
| 8 | 10nF 1% | C_0805_2012Metric | C1A1, C1A2, C1B1, C1B2, C1C1, C1C2, C1D1, C1D2 |
| 2 | 100uF 35V | CP_Radial_D8.0mm_P5.00mm | C2, C13 |
| 6 | 4n7 1% | C_0805_2012Metric | C2A1, C2A2, C2B1, C2B2, C2C1, C2C2 |
| 2 | 220uF 6V | CP_Radial_D6.3mm_P2.50mm | C3, C14 |
| 2 | 2n2 | C_0805_2012Metric | C4, C15 |
| 6 | 220nF | C_Axial_L12.0mm_D8.5mm_P20.00mm_Horizontal | C5, C6, C7, C16, C17, C18 |
| 4 | 2.2nF | C_0805_2012Metric | C8, C19, C23, C24 |
| 2 | 1n5 | C_0805_2012Metric | C9, C20 |
| 2 | 47pF | C_1206_3216Metric | C10, C21 |
| 2 | 100uF 35V NP | C_Radial_D16.0mm_H25.0mm_P7.50mm | C11, C22 |
| 2 | 1.5nF | C_0805_2012Metric | C25, C26 |
| 8 | 0.1uF | C_1206_3216Metric | C27, C28, C29, C30, C31, C32, C33, C34 |
| 2 | 10uF | C_1206_3216Metric | C35, C36 |
| 2 | 390 | R_1206_3216Metric | R0A1, R0A2 |
| 2 | 470 | R_1206_3216Metric | R0B1, R0B2 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1K | R_1206_3216Metric | R0C1, R0C2 |
| 4 | 180K | R_1206_3216Metric | R1, R6, R18, R23 |
| 2 | 110K | R_1206_3216Metric | R1A1, R1A2 |
| 2 | 160K | R_1206_3216Metric | R1B1, R1B2 |
| 2 | 330K | R_1206_3216Metric | R1C1, R1C2 |
| 2 | 1M | R_1206_3216Metric | R2, R19 |
| 2 | 13K | R_1206_3216Metric | R2A1, R2A2 |
| 2 | 33K | R_1206_3216Metric | R2B1, R2B2 |
| 2 | 47K | R_1206_3216Metric | R2C1, R2C2 |
| 2 | 68K | R_1206_3216Metric | R3, R20 |
| 2 | 5600 | R_1206_3216Metric | R3A1, R3A2 |
| 4 | 2700 | R_1206_3216Metric | R3B1, R3B2, R3C1, R3C2 |
| 6 | 30k | R_1206_3216Metric | R4, R9, R12, R21, R26, R29 |
| 2 | 12K | R_1206_3216Metric | R5, R22 |
| 8 | 2.2k | R_1206_3216Metric | R7, R8, R10, R11, R24, R25, R27, R28 |
| 2 | 4K7 | R_1206_3216Metric | R13, R30 |
| 2 | 11K | R_1206_3216Metric | R14, R31 |
| 2 | 100K | R_1206_3216Metric | R15, R32 |
| 2 | 68 | R_1206_3216Metric | R16, R33 |
| 2 | 22K | R_1206_3216Metric | R17, R34 |
Maria phono preamp design files
The KiCad project lives in the sibiryakov/maria-phono-preamp repository on GitHub; these links point at the commit this page was built from.
Maria phono preamp: common questions
How big is the Maria phono preamp PCB?
The Maria phono preamp measures 150 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Maria phono preamp?
115 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Maria phono preamp design files?
From the sibiryakov/maria-phono-preamp repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Maria phono preamp design in my own project?
Yes, under the terms of its MIT license, which sibiryakov chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687