Science

Sidbit08·ABEX_PCB_v1·hardware/project/Sciencepcb.kicad_pcb

Science PCB layout, top view — open source ESP32 board by Sidbit08

About the Science PCB

Science is an open source ESP32 PCB design by Sidbit08, published on GitHub. It is a 2-layer board measuring 126.2 × 143.6 mm, with 89 components from 30 distinct parts.

Its main chip is the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family. Other key parts include the LM2596 Buck Converter. By type, the board carries 25 resistors, 24 diodes, 21 connectors, 8 transistors, 8 relays and 2 ICs.

It belongs with the sensors and robotics & motion designs in this gallery.

From the project

A custom ESP32-S3-based PCB designed in KiCad for automated soil sample analysis, featuring drivers and interfaces for environmental sensors, peristaltic pumps, and auger drilling actuators.

A dedicated soil sample collection and analysis PCB for Vishwa VJTI's rover science subsystem.

ABEX PCB brings soil sampling, pump control, and sensor integration together on an ESP32-S3-based board. It supports an auger drilling mechanism operated using stepper and servo motors, along with six peristaltic pumps for soil composition analysis workflows involving Bradford, labile carbon, pH, and catalase tests.

Science, from the project README
From the project README

Main components on the Science

Science bill of materials (BOM)

89 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DEVKITC-1-N8R2
U1
1
LM2596 Buck Converter
U3
8
AO3400A
Q5, Q10, Q11, Q12, Q13, Q14, Q15, Q16
1
Power3
J1
1
ESP-RHS
J2
1
ESP-LHS
J3
1
Power
J7
1
BME280
J10
1
DHT22
J11
1
MotorDriver_1
J12
1
MotorDriver_2
J13
1
Soil Sensor
J14
1
DS18B20
J15
1
Servo2
J16
1
Servo1
J17
1
Neo-3
J19
1
Linear Actuator
J20
1
Pump2
J21
1
Pump6
J22
1
Pump5
J23
Show 10 more
QtyPartRefs
1
Pump4
J24
1
Pump3
J25
1
Pump1
J26
1
Power2
J33
1
Conn_01x02
5V output
8
SRA-05VDC-CL
K1, K2, K3, K4, K6, K7, K8, K9
16
LED
D1, D2, D4, D5, D7, D8, D10, D11 +8
8
D
D3, D6, D9, D12, D18, D21, D24, D27
24
1k
R1, R2, R3, R4, R5, R6, R7, R8 +16
1
4.7k
R13

Science design files

The KiCad project lives in the Sidbit08/ABEX_PCB_v1 repository on GitHub; these links point at the commit this page was built from.

Science: common questions

What microcontroller does the Science use?

The Science is built around the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family.

How big is the Science PCB?

The Science measures 126.2 × 143.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Science?

89 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Science design files?

From the Sidbit08/ABEX_PCB_v1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Science design in my own project?

The repository has no license, so all rights stay with Sidbit08. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Science without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ABEX_PCB_v1

Similar boards