Science updated

Sidbit08·ABEX_PCB_v1·hardware/legacy/science_updated.kicad_pcb

Science updated PCB layout, top view — open source ESP32 board by Sidbit08

About the Science updated PCB

Science updated is an open source ESP32 PCB design by Sidbit08, published on GitHub. It is a 2-layer board measuring 118.7 × 138.7 mm, with 88 components from 27 distinct parts.

Its main chip is the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family. Other key parts include the YAAJ_DCDC_StepDown_LM2596. By type, the board carries 25 resistors, 24 diodes, 21 connectors, 8 transistors, 8 relays and 2 ICs.

It belongs with the sensors designs in this gallery.

From the project

A custom ESP32-S3-based PCB designed in KiCad for automated soil sample analysis, featuring drivers and interfaces for environmental sensors, peristaltic pumps, and auger drilling actuators.

scienceupdated.kicadpcb and scienceupdated.kicadpro were included alongside the main Sciencepcb. project in the source archive. No matching scienceupdated.kicadsch was supplied. Their archive timestamps are older than the main board, but timestamps alone do not establish design authority.

Retained unchanged for comparison. The repository entry point is ../project/Sciencepcb.kicadpro`. Do not mix fabrication outputs from these boards without confirming the revision.

Main components on the Science updated

Science updated bill of materials (BOM)

88 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DEVKITC-1-N8R2
U1
1
YAAJ_DCDC_StepDown_LM2596
U3
8
AO3400A
Q5, Q10, Q11, Q12, Q13, Q14, Q15, Q16
1
Power3
J1
1
ESP-RHS
J2
1
ESP-LHS
J3
1
Power
J7
1
BME280
J10
1
DHT22
J11
2
Motor Driver
J12, J13
1
Soil Sensor
J14
1
DS18B20
J15
2
Servo
J16, J17
1
Neo-3
J19
1
Linear Actuator
J20
1
Pump2
J21
1
Pump3
J22
1
Pump4
J23
1
Pump5
J24
1
Pump1
J25
Show 7 more
QtyPartRefs
1
Pump6
J26
1
Power2
J33
8
SRA-05VDC-CL
K1, K2, K3, K4, K6, K7, K8, K9
16
LED
D1, D2, D4, D5, D7, D8, D10, D11 +8
8
D
D3, D6, D9, D12, D18, D21, D24, D27
24
1k
R1, R2, R3, R4, R5, R6, R7, R8 +16
1
4.7k
R13

Science updated design files

The KiCad project lives in the Sidbit08/ABEX_PCB_v1 repository on GitHub; these links point at the commit this page was built from.

Science updated: common questions

What microcontroller does the Science updated use?

The Science updated is built around the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family.

How big is the Science updated PCB?

The Science updated measures 118.7 × 138.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Science updated?

88 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Science updated design files?

From the Sidbit08/ABEX_PCB_v1 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Science updated design in my own project?

The repository has no license, so all rights stay with Sidbit08. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Science updated without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ABEX_PCB_v1

Similar boards