HardLabs

MS60

siderakb·ms60·2u-shift/MS60_2us.kicad_pcb

MS60 PCB layout, top view — open source RP2040/RP2350 board by siderakb

About the MS60 PCB

MS60 is an open source RP2040/RP2350 PCB design by siderakb, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 285 × 97.1 mm, with 168 components from 22 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the RT9013-33GB, W25Q128JVS and SRV05-4. By type, the board carries 65 diodes, 16 capacitors, 9 resistors, 5 switches, 4 ICs and 1 crystal.

It belongs with the keyboards designs in this gallery.

From the project

MS60 60% size keyboard with dedicated arrow keys

Stabilizer footprints from ebastler/marbastlib.

Main components on the MS60

RT9013-33GBW25Q128JVSRP2040SRV05-4

MS60 bill of materials (BOM)

168 components, 22 distinct parts.

QtyPartRefs
1
RT9013-33GB
U1
1
W25Q128JVS
U2
1
RP2040
U3
1
SRV05-4
U5
1
12MHz
Y1
1
USB_C_Receptacle_USB2.0
J2
1
500mA, 6V
F1
65
SW_Push_45deg
KEY1, KEY2, KEY3, KEY4, KEY5, KEY6, KEY7, KEY8 +57
1
MX_stab
S42
1
MX_stab
S43
1
MX_stab
S60
1
BOOT
SW1
1
RESET
SW2
1
Blue
LD2
65
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +57
4
1uF
C1, C2, C8, C16
10
100nF
C3, C6, C7, C9, C10, C11, C12, C13 +2
2
20pF
C4, C5
3
1k
R1, R4, R6
2
27
R2, R3
Show 2 more
QtyPartRefs
2
10k
R5, R7
2
5.1k
R9, R10

MS60 design files

The KiCad project lives in the siderakb/ms60 repository on GitHub; these links point at the commit this page was built from.

MS60: common questions

What microcontroller does the MS60 use?

The MS60 is built around the RP2040, from the RP2040/RP2350 family.

How big is the MS60 PCB?

The MS60 measures 285 × 97.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MS60?

168 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the MS60 design files?

From the siderakb/ms60 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MS60 design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which siderakb chose for the repository.

Can I test firmware for the MS60 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in ms60

Similar boards