Hdctl 01
About the Hdctl 01 PCB
Hdctl 01 is an open source PCB design by sim82, published on GitHub under the MIT license. It is a 4-layer board measuring 101.6 × 70.1 mm, with 23 components from 15 distinct parts.
Other key parts include the PAL20RS10, 74HCT574, 74HC245 and 74HC193. By type, the board carries 5 ICs, 5 connectors, 5 capacitors, 4 resistors, 2 diodes and 1 jumper.
It belongs with the retro computing designs in this gallery.
Main components on the Hdctl 01
Hdctl 01 bill of materials (BOM)
23 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PAL20RS10 | DIP-24_W7.62mm_Socket | U1 |
| 2 | 74HCT574 | SO-20_12.8x7.5mm_P1.27mm | U2, U3 |
| 1 | 74HC245 | SO-20_12.8x7.5mm_P1.27mm | U4 |
| 1 | 74HC193 | SO-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | DIN41612_02x32_AC | DIN41612_C_2x32_Male_Horizontal_THT | J1 |
| 2 | Conn_02x20_Odd_Even | IDC-Header_2x20_P2.54mm_Vertical | J2, J4 |
| 1 | Conn_02x22_Odd_Even | PinSocket_2x22_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x02_Socket | PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | SolderJumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W8.61mm_P2.54mm | SW1 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 5 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6, C7 |
| 2 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | R_Pack04 | R_Array_Convex_4x0612 | RN1 |
Hdctl 01 design files
The KiCad project lives in the sim82/6502_sbc repository on GitHub; these links point at the commit this page was built from.
Hdctl 01: common questions
How big is the Hdctl 01 PCB?
The Hdctl 01 measures 101.6 × 70.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Hdctl 01?
23 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hdctl 01 design files?
From the sim82/6502_sbc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hdctl 01 design in my own project?
Yes, under the terms of its MIT license, which sim82 chose for the repository.
More boards in 6502_sbc
Cpu board 03
99.1 × 94.2 mm63 parts2LMIT1
Cpu board 03 4l
99.1 × 94.2 mm62 parts4LMIT1
Vga mem output 01 4l
80.9 × 100.6 mm61 parts4LMIT1
Cpu board 02
119.4 × 91.4 mm58 parts2LMIT1
Pcb01 4l
119.4 × 91.4 mm58 parts4LMIT1
Vga mem output 01
59.4 × 65.5 mm34 parts2LMIT1
Com board 01
94.3 × 40.9 mm14 parts2LMIT1
Vga timing 01
70.6 × 26.9 mm12 parts2LMIT1
Min uart board 01
99.1 × 34.5 mm11 parts2LMIT1
Backplane
120.7 × 92.7 mm10 parts2LMIT1
Io board 01
120.7 × 92.7 mm4 parts2LMIT1
Similar boards
Amiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Atari pickup
26.4 × 53.9 mm7 parts2LGPL-3.01.0k
Deniseadapter
26.7 × 62.2 mm16 parts2LGPL-3.01.0k
Analog
53.9 × 23.2 mm33 parts2LGPL-3.01.0k
Rgb to hdmi
77 × 97 mm67 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k