V0-UmbilicalBoard

skuep·V0-Umbilical-Plus·Kicad/Frame_PCB/V0-UmbilicalBoard.kicad_pcb

V0-UmbilicalBoard PCB layout, top view — open source board by skuep

About the V0-UmbilicalBoard PCB

V0-UmbilicalBoard is an open source PCB design by skuep, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 122 × 37 mm, with 17 components from 15 distinct parts.

By type, the board carries 13 connectors and 3 capacitors.

It belongs with the sensors designs in this gallery.

From the project

Voron V0 Umbilical Plus with integrated ADXL345

The 'Plus' version of the V0-Umbilical features an integrated ADXL345 Accelerometer that can be used for Input Shaper Tuning. The Molex MicroFit connector was changed from a 14-pin to 20-pin version to acommodate the additional wires for the ADXL345.

In the following, the changes to the original README from timmit99 is given. Please read the README in the original project first.

V0-UmbilicalBoard bill of materials (BOM)

17 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONN_02X10_TOP_BOTTOM
Conn_02x10_Top_Bottom
J1
1
Motor
J2
1
Hotend Fan
J3
1
Part Cooling Fan
J4
1
Heater
J5
1
Thermistor
J6
1
X-Endstop
J7
1
Chamber Thermistor
J8
1
Neopixel (from controller)
J9
2
Neopixel Strip 1
J10, J11
1
Neopixel Out
J12
1
Accelerometer
J13
1
Thermistor
TH1
2
4.7U/16V/X5R
C
C1, C3
1
10N/NP0
C
C2

V0-UmbilicalBoard design files

The KiCad project lives in the skuep/V0-Umbilical-Plus repository on GitHub; these links point at the commit this page was built from.

V0-UmbilicalBoard: common questions

How big is the V0-UmbilicalBoard PCB?

The V0-UmbilicalBoard measures 122 × 37 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the V0-UmbilicalBoard?

17 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the V0-UmbilicalBoard design files?

From the skuep/V0-Umbilical-Plus repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the V0-UmbilicalBoard design in my own project?

Yes, under the terms of its GPL-3.0 license, which skuep chose for the repository.

More boards in V0-Umbilical-Plus

Similar boards