Toolhead

skuep·V0-Umbilical-Plus·Kicad/Toolhead_PCB/Toolhead_PCB.kicad_pcb

Toolhead PCB layout, top view — open source board by skuep

About the Toolhead PCB

Toolhead is an open source PCB design by skuep, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 49.8 × 29 mm, with 17 components from 13 distinct parts.

Other key parts include the ADXL345BCCZ and LP2985-33DBVR. By type, the board carries 8 connectors, 4 capacitors, 3 resistors and 2 ICs.

It belongs with the sensors designs in this gallery.

From the project

Voron V0 Umbilical Plus with integrated ADXL345

The 'Plus' version of the V0-Umbilical features an integrated ADXL345 Accelerometer that can be used for Input Shaper Tuning. The Molex MicroFit connector was changed from a 14-pin to 20-pin version to acommodate the additional wires for the ADXL345.

In the following, the changes to the original README from timmit99 is given. Please read the README in the original project first.

Main components on the Toolhead

Toolhead bill of materials (BOM)

17 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADXL345BCCZ
U1
1
LP2985-33DBVR
U2
1
CONN_02X10_TOP_BOTTOM
Conn_02x10_Top_Bottom
J1
1
Motor
J2
1
Hotend Fan
J3
2
Part Cooling Fan
J4, J8
1
Heater
J5
1
Thermistor
J6
1
X-Endstop
J7
2
4.7U/16V/X5R
4.7u/16V/X5R
C1, C3
2
10N/NP0
10n/NP0
C2, C4
2
10R
R1, R3
1
10K
R2

Toolhead design files

The KiCad project lives in the skuep/V0-Umbilical-Plus repository on GitHub; these links point at the commit this page was built from.

Toolhead: common questions

How big is the Toolhead PCB?

The Toolhead measures 49.8 × 29 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Toolhead?

17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Toolhead design files?

From the skuep/V0-Umbilical-Plus repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Toolhead design in my own project?

Yes, under the terms of its GPL-3.0 license, which skuep chose for the repository.

More boards in V0-Umbilical-Plus

Similar boards