Trap mini v2
smaohua·scoutlabs·scoutlabs-trap-miniv2-mainboard-develop/kicad/trap_mini_v2.kicad_pcb
About the Trap mini v2 PCB
Trap mini v2 is an open source ESP32 PCB design by smaohua, published on GitHub. It is a 4-layer board measuring 54 × 30 mm, with 100 components from 32 distinct parts.
Its main chip is the ESP32-S3R8, from the ESP32 family. Other key parts include the ME6211C33, DS8561-18S3, LR6206B-U28, TPS63020 and W25Q128JVPIQ. By type, the board carries 42 capacitors, 28 resistors, 8 ICs, 8 diodes, 4 connectors and 3 transistors.
Main components on the Trap mini v2
Trap mini v2 bill of materials (BOM)
100 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ME6211C33 | SOT-23-5 | U1, U8 |
| 1 | DS8561-18S3 | SOT-23 | U2 |
| 1 | LR6206B-U28 | SOT-23 | U3 |
| 1 | TPS63020 | QFN14_1 | U4 |
| 1 | ESP32-S3R8 | QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U5 |
| 1 | W25Q128JVPIQ | WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm | U6 |
| 1 | PCF8563T | SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | 2N7002DW | SOT-363_SC-70-6 | Q1 |
| 1 | HSW6604 | TSOT-23-6 | Q4 |
| 1 | HL51850HP25 | LED_D5.0mm_Clear | Q6 |
| 1 | 40 MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 32.768k | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y3 |
| 1 | SHOU HAN TYPE-C 16P QTWT | SHOU HAN TYPE-C 16P QTWT | J2 |
| 1 | Conn_01x24_Socket | Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J3 |
| 2 | Conn_01x08_Socket | PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left | J9, J10 |
| 1 | 3V 927 | BatteryHolder_Keystone_2998_1x6.8mm | BT2 |
| 1 | SW_Push_SPDT | SW_Push_2P2T_Toggle_CK_PVA2xxH1xxxxxxV2 | SW1 |
| 1 | TACT | SW_SPST_B3U-1000P | SW3 |
| 5 | PESDNC2FD5VB-MS | D_SOD-882 | D2, D8, D9, D10, D11 |
| 1 | LED_BGKR | LED_RGB_Everlight_EASV3015RGBA0_Horizontal | D3 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SD103 | D_SOD-123 | D4, D5 |
| 1 | 2.8 nH | L_0402_1005Metric | L1 |
| 1 | 1uH | L_TracoPower_TCK-047_5.2x5.8mm | L2 |
| 22 | 100nF | C_0402_1005Metric | C1, C4, C5, C7, C10, C13, C15, C16 +14 |
| 2 | 3.3pF | C_0402_1005Metric | C6, C8 |
| 5 | 10 pF | C_0402_1005Metric | C9, C36, C37, C41, C42 |
| 11 | 10uF | C_0603_1608Metric | C11, C12, C14, C17, C24, C26, C27, C29 +3 |
| 2 | 330uF | CP_Elec_6.3x5.7 | C20, C21 |
| 19 | 10k | R_0402_1005Metric | R1, R4, R6, R7, R8, R10, R12, R13 +11 |
| 1 | 63.4 k | R_0402_1005Metric | R11 |
| 5 | 1M | R_0402_1005Metric | R15, R16, R19, R20, R21 |
| 3 | 100R | R_0603_1608Metric | R37, R38, R39 |
Trap mini v2 design files
The KiCad project lives in the smaohua/scoutlabs repository on GitHub; these links point at the commit this page was built from.
Trap mini v2: common questions
What microcontroller does the Trap mini v2 use?
The Trap mini v2 is built around the ESP32-S3R8, from the ESP32 family.
How big is the Trap mini v2 PCB?
The Trap mini v2 measures 54 × 30 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Trap mini v2?
100 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Trap mini v2 design files?
From the smaohua/scoutlabs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Trap mini v2 design in my own project?
The repository has no license, so all rights stay with smaohua. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Trap mini v2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in scoutlabs
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k