2350

smessmacher·RP2350-Eth

2350 PCB layout, top view — open source RP2040/RP2350 board by smessmacher

About the 2350 PCB

2350 is an open source RP2040/RP2350 PCB design by smessmacher, published on GitHub. It is a 4-layer board measuring 80 × 47 mm, with 83 components from 48 distinct parts.

Its main chip is the RP2350_80QFN, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3, W25Q128JVS and W5500. By type, the board carries 39 capacitors, 26 resistors, 4 ICs, 4 connectors, 2 crystals and 2 switches.

From the project

Ethernet rp2350 version of the pocketReader

An RP2350-based Ethernet breakout board designed for the PocketDL platform. The board integrates a Raspberry Pi RP2350 microcontroller with a WIZnet W5500 hardwired TCP/IP Ethernet controller, USB Type-C, SPI NOR flash, and a micro-SD card interface on a compact 4-layer PCB.

Power domains are isolated to prevent digital switching noise from coupling into the Ethernet analog front-end.

Main components on the 2350

2350 bill of materials (BOM)

83 components, 48 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3
U1
1
RP2350_80QFN
U2
1
W25Q128JVS
U3
1
W5500
U6
1
ABM8-272-T3
Y1
1
C70571
25MHz ±10ppm 10pF
Y2
1
C160403
SM03B-SRSS-TB(LF)(SN)
J1
1
C2982547
Micro_SD_Card
J2
1
CONN_01X09
Conn_01x09
J3
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J6
1
X12ADGWA3DY1027
RJ1
2
SW_Push
SW1, SW2
1
H16C91S
TR2
1
LED
D2
1
C5337989
10V 260mv 2A
LGE
D8
1
3.3U
3.3u
L1
1
C14709
L
L2
13
100N
100n
C1, C2, C3, C4, C5, C6, C7, C8 +5
1
4.7U
4.7u
C13
2
4.7U
4.7u
C14, C15
Show 28 more
QtyPartRefs
2
15P
15p
C16, C17
1
1UF
1uF
C18
1
0.1UF
0.1uF
C19
2
10UF
10uF
C20, C21
2
C1549
Cap
C22, C23
2
10NF
10nF
C24, C36
1
4.7UF
4.7uF
C25
6
100NF
100nF
C26, C27, C28, C29, C30, C31
1
10UF/16V
10uF/16V
C32
2
6.8NF
6.8nF
C33, C35
1
22NF
22nF
C34
1
1NF/2KV
1nF/2kV
C37
1
4.7NF
4.7nF
C38
1
33
R1
3
1k
R2, R3, R4
2
5.1K
R5, R6
2
27
R7, R8
5
10K
R9, R10, R11, R12, R13
1
RES2
Res2
R14
1
C170219
12.4k1%
R15
2
C844932
50R1%
R16, R17
1
C25077
10R1%
R18
2
C3017464
82R1%
R19, R20
2
C114757
75Ω ±1% 62.5mW
R21, R22
1
C413067
RES 150Ω ±1% 100mW 0603
R23
1
C102816
RES 150Ω ±1% 100mW 0603
R24
1
0
R28
1
180
R30

2350 design files

The KiCad project lives in the smessmacher/RP2350-Eth repository on GitHub; these links point at the commit this page was built from.

2350: common questions

What microcontroller does the 2350 use?

The 2350 is built around the RP2350_80QFN, from the RP2040/RP2350 family.

How big is the 2350 PCB?

The 2350 measures 80 × 47 mm, has 4 copper layers and is 1.56 mm thick.

How many components are on the 2350?

83 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 2350 design files?

From the smessmacher/RP2350-Eth repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 2350 design in my own project?

The repository has no license, so all rights stay with smessmacher. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 2350 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in RP2350-Eth

Similar boards