2350 copy for test
smessmacher·RP2350-Eth
About the 2350 copy for test PCB
2350 copy for test is an open source RP2040/RP2350 PCB design by smessmacher, published on GitHub. It is a 4-layer board measuring 80 × 47 mm, with 83 components from 49 distinct parts.
Its main chip is the RP2350_80QFN, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3, W25Q128JVS and W5500. By type, the board carries 39 capacitors, 27 resistors, 4 ICs, 3 connectors, 2 crystals and 2 switches.
From the project
Ethernet rp2350 version of the pocketReader
An RP2350-based Ethernet breakout board designed for the PocketDL platform. The board integrates a Raspberry Pi RP2350 microcontroller with a WIZnet W5500 hardwired TCP/IP Ethernet controller, USB Type-C, SPI NOR flash, and a micro-SD card interface on a compact 4-layer PCB.
Power domains are isolated to prevent digital switching noise from coupling into the Ethernet analog front-end.
Main components on the 2350 copy for test
2350 copy for test bill of materials (BOM)
83 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | RP2350_80QFN | RP2350-QFN-80-1EP_10x10_P0.4mm_EP3.4x3.4mm_ThermalVias | U2 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | W5500 | LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm | U6 |
| 1 | ABM8-272-T3 XYDBPCNANF-12MHZ | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | C70571 25MHz ±10ppm 10pF | CRYSTAL-SMD_4P-L2.0-W1.6-BL-2 | Y2 |
| 1 | C2982547 Micro_SD_Card | TF-SMD_XKTF-0803-0 | J2 |
| 1 | CONN_01X09 SM03B-SRSS-TB(LF)(SN) | SAMTEC_T1M-03-F-SH-L-K | J3 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB-C-SMD_TYPE-C-16P-1 | J6 |
| 1 | X12ADGWA3DY1027 | RJ45-TH_XKB_X12ADHWA3DY1027 | RJ1 |
| 2 | B3U-1000P | SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | H16C91S | Transformer_Ethernet_Bel_S558-5999-T7-F | TR2 |
| 1 | LED | LED_0402_1005Metric | D2 |
| 1 | C5337989 10V 260mv 2A LGE | D_SMA | D8 |
| 1 | 3.3U 3.3u | L_pol_2016 | L1 |
| 1 | C14709 L | C0603 | L2 |
| 13 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +5 |
| 1 | 4.7U 4.7u | C_0402_1005Metric | C13 |
| 2 | 4.7U 4.7u | C_0402_1005Metric_small_pads | C14, C15 |
| 2 | 15P 12pF | C_0402_1005Metric | C16, C17 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1UF 1uF | C_0402_1005Metric | C18 |
| 1 | 0.1UF 0.1uF | C_0402_1005Metric | C19 |
| 2 | 10UF 10uF | C_0402_1005Metric | C20, C21 |
| 2 | C1549 Cap | C_0402_1005Metric | C22, C23 |
| 2 | 10NF 10nF | C_0402_1005Metric | C24, C36 |
| 1 | 4.7UF 4.7uF | C_0402_1005Metric | C25 |
| 6 | 100NF 100nF | C_0402_1005Metric | C26, C27, C28, C29, C30, C31 |
| 1 | 10UF/16V 10uF/16V | C0603 | C32 |
| 2 | 6.8NF 6.8nF | C0201 | C33, C35 |
| 1 | 22NF 22nF | C_0402_1005Metric | C34 |
| 1 | 1NF/2KV 1nF/2kV | C0201 | C37 |
| 1 | 4.7NF 4.7nF | C_0402_1005Metric | C38 |
| 1 | 33 | R_0402_1005Metric | R1 |
| 3 | 1k | R_0402_1005Metric | R2, R3, R4 |
| 2 | 5.1K | R_0402_1005Metric | R5, R6 |
| 2 | 27 | R_0402_1005Metric | R7, R8 |
| 4 | 10K | R_0402_1005Metric | R9, R10, R11, R13 |
| 1 | 10K 1K | R_0402_1005Metric | R12 |
| 1 | RES2 Res2 | R_0402_1005Metric | R14 |
| 1 | C170219 12.4k1% | R_0402_1005Metric | R15 |
| 2 | C844932 50R1% | R0603 | R16, R17 |
| 1 | C25077 10R1% | R_0402_1005Metric | R18 |
| 2 | C3017464 82R1% | R_0402_1005Metric | R19, R20 |
| 2 | C114757 75Ω ±1% 62.5mW | R0402 | R21, R22 |
| 1 | C413067 RES 150Ω ±1% 100mW 0603 | R0402 | R23 |
| 1 | C102816 RES 150Ω ±1% 100mW 0603 | R0402 | R24 |
| 1 | 0 | R_0402_1005Metric | R28 |
| 1 | DNF | R_0402_1005Metric | R29 |
| 1 | 180 | R_0402_1005Metric | R30 |
2350 copy for test design files
The KiCad project lives in the smessmacher/RP2350-Eth repository on GitHub; these links point at the commit this page was built from.
2350 copy for test: common questions
What microcontroller does the 2350 copy for test use?
The 2350 copy for test is built around the RP2350_80QFN, from the RP2040/RP2350 family.
How big is the 2350 copy for test PCB?
The 2350 copy for test measures 80 × 47 mm, has 4 copper layers and is 1.56 mm thick.
How many components are on the 2350 copy for test?
83 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2350 copy for test design files?
From the smessmacher/RP2350-Eth repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the 2350 copy for test design in my own project?
The repository has no license, so all rights stay with smessmacher. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2350 copy for test without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in RP2350-Eth
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k