126 open source boards using the W5500
Real designs built with the W5500, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ethersweep
Neumi
79 × 38 mm97 parts2LMIT587W5500
multigcs
52.3 × 21.8 mm34 parts2LGPL-2.091STM32
FastLOGIC
Neumi
123 × 87.5 mm181 parts4LMIT23RP2040/RP2350
Zero r2 mini w5500
mean00
37.3 × 63.9 mm45 parts2LNo license19RP2040/RP2350
Rioctrl controller
festlv
190 × 100 mm260 parts4LCERN-OHL-S-2.016STM32
Oro Link
oro-os
153.7 × 88.9 mm341 parts8LMIT13ESP32
Access controller
physiii150 × 90 mm186 parts4LNo license13Microchip SAM
Node
ParadigmHyperloop
127 × 127 mm390 parts4LCustom license11STM32
Scoms tacnpr
partio-scout
99.1 × 99.1 mm279 parts4LTAPR-OHL-1.09RP2040/RP2350
REG1-IpController2040
OpenKNX
83.2 × 15.7 mm86 parts4LCC-BY-NC-4.09STM32
PoE Ambient Sensor
newAM
80 × 50 mm54 parts2LMIT6Poe addon
newAM
52.3 × 28.4 mm38 parts2LCERN-OHL-P-2.06MasterBoard A
Gregification
60 × 100 mm163 parts2LMIT5WT32 Ethernet POE 007
austinscreations
42 × 38 mm52 parts4LGPL-3.05FPGA
Eth4k hardware
theta-machines
98 × 58 mm132 parts4LCERN-OHL-W-2.04Ethernet breakout W5500
SolderedElectronics
38 × 54 mm59 parts2LTAPR-OHL-1.04PIC
YukaLink
Misaka0x2730
94.3 × 81.8 mm235 parts4LGPL-3.03STM32
Link
oats-center
88.9 × 76.2 mm121 parts4LNo license3STM32
EtherKraken
karmakrafts
87.6 × 100.8 mm80 parts2LApache-2.03EasyDABv2
KaiBLI
99.8 × 49.8 mm171 parts2LGPL-2.02STM32
GN10Mainboard
ararobo
80 × 60 mm124 parts4LNo license2ESP32
Genesis Board
iffycodes
165.8 × 119.2 mm89 parts2LNo license2- schematic only · 39 parts
W5500 hardware
hasanyucelcogal
39 partsNo license2 ESP32
ESP32S3 Audio Cam POE
jharvey
109.4 × 129.7 mm320 parts4LMIT1STM32
Smu main
PaulBichl
160 × 100 mm240 parts4LNo license1RP2040/RP2350
DMXion 4port node
NEOgHacking
100 × 100 mm195 parts4LGPL-3.01ESP32
HolyGrail
whbCool
157 × 73 mm195 parts6LNo license1ESP32
Eveningstar hardware
ciaassured
81.2 × 71.6 mm120 parts2LAGPL-3.01ESP32
ARCHINET
NewsanLab
100 × 60 mm99 parts2LNo license1ESP32
SmartHomeSystemBasisStation
StefanZott
160 × 132.6 mm68 parts2LNo license1ESP32
Compact-S1-placement
ddasdkimo
160 × 110 mm694 parts2LNo license0ModularPSU
dmanla
80 × 40 mm444 parts2LTAPR-OHL-1.00MHCNC
TheHexaCube
195 × 123 mm408 parts4LNo license0AVR/Arduino
MEP MAXI 85V-1 REV 2 Interface Board
JGilcreast
221.5 × 130.8 mm323 parts4LNo license0ESP32
Esp32 s3 dwm3000 uwb anchor with relay outputs
Takingo
160 × 100 mm322 parts4LNo license0STM32
Placed
danhmanu
100 × 80 mm310 parts2LNo license0
How designs wire the W5500
Read from the KiCad layouts of 90 open source designs, one per repository: what each pin of the W5500 connects to, and the resistors, capacitors and other passives placed on it.
- The TOCAP pin has a capacitor to GND on 82 of 90 designs, most often 4.7 µF (then 10 µF).
- The XI/CLKIN pin has a crystal on 81 of 90 designs, most often 25 MHz.
- The 1V2O pin has a capacitor to GND on 80 of 90 designs, most often 10 nF (then 100 nF).
- The EXRES1 pin has a resistor to GND on 78 of 90 designs, most often 12.4 kΩ (then 12 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TXNpin 1 | Connected to: A connector 38% |
|
| TXPpin 2 | Connected to: A connector 38% |
|
| AGNDpin 3, 9, 14, 16, 19, 48 | Connected to: GND 91% | — |
| AVDDpin 4, 8, 11, 15, 17, 21 | Connected to: 3.3V 69% · a signal 28% |
|
| RXNpin 5 | Connected to: Signal 100% |
|
| RXPpin 6 | Connected to: Signal 100% |
|
| DNCpin 7 | Connected to: Not connected 98% | — |
| EXRES1pin 10 | Connected to: Signal 96% |
|
| NCpin 12, 13, 46, 47 | Connected to: Not connected 99% | — |
| VBGpin 18 | Connected to: Not connected 90% | — |
| TOCAPpin 20 | Connected to: Signal 93% |
|
| 1V2Opin 22 | Connected to: Signal 92% |
|
| RSVDpin 23, 38, 39, 40, 41, 42 | Connected to: Not connected 78% | — |
| SPDLEDpin 24 | Connected to: Not connected 74% · a signal 24% | — |
| LINKLEDpin 25 | Connected to: Signal 91% |
|
| DUPLEDpin 26 | Connected to: Not connected 73% · a signal 27% | — |
| ACTLEDpin 27 | Connected to: Signal 93% |
|
| VDDpin 28 | Connected to: 3.3V 83% · a signal 16% |
|
| GNDpin 29 | Connected to: GND 91% | — |
| XI/CLKINpin 30 | Connected to: Signal 94% |
|
| XOpin 31 | Connected to: Signal 88% |
|
| INTpin 36 | Connected to: The microcontroller 56% |
|
| RSTpin 37 | Connected to: The microcontroller 57% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ethersweep by Neumi, Duet 2 Maestro by Duet3D, W5500 by multigcs and BladeCore-M54E by DvidMakesThings.
The W5500 in open source designs
The gallery holds 126 open source boards using the W5500 from 91 GitHub repositories; a typical one measures about 92.4 × 80 mm and carries around 103 components.
53% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.
The most starred is Ethersweep by Neumi.
Parts used alongside the W5500
Microcontrollers on boards using the W5500
What boards using the W5500 are built for
W5500: common questions
Where can I find a W5500 reference design?
Each of the 126 boards on this page is a real design using the W5500. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the W5500 TOCAP pin connected?
The TOCAP pin has a capacitor to GND on 82 of 90 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 90 open source designs using the W5500.
How is the W5500 XI/CLKIN pin connected?
The XI/CLKIN pin has a crystal on 81 of 90 designs, most often 25 MHz. Counted from the KiCad layouts of 90 open source designs using the W5500.
How is the W5500 1V2O pin connected?
The 1V2O pin has a capacitor to GND on 80 of 90 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 90 open source designs using the W5500.
What parts are used alongside the W5500?
The USBLC6-2SC6, AMS1117-3.3, RP2040, W25Q128JVS and ESP32-S3-WROOM-1 appear in the most repositories here.
Which microcontrollers do boards using the W5500 use?
Most are built on ESP32 (36), STM32 (24), RP2040/RP2350 (23) and AVR/Arduino (2).
How big is a typical board using the W5500?
The median is 92.4 × 80 mm, and 53% are two-layer designs.
What is the most popular open source board using the W5500?
By GitHub stars, Ethersweep by Neumi, with 587 stars.
Can I simulate one of these boards using the W5500 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.