Envirotector
Sn3akySqu1d·Envirotector·Kicad/Envirotector.kicad_pcb
About the Envirotector PCB
Envirotector is an open source RP2040/RP2350 PCB design by Sn3akySqu1d, published on GitHub. It is a 2-layer board measuring 75 × 77.7 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. Other key parts include the DHT11. By type, the board carries 5 ICs, 1 connector and 1 switch.
It belongs with the displays & leds and sensors designs in this gallery.
From the project
Envirotector is a compact, portable weather station that logs data to an SD card and displays temperature, air pressure and humidity data as well as the time on an OLED display.
Envirotector is a compact, portable weather station that logs data to an SD card and displays temperature, air pressure and humidity data as well as the time on an OLED display.
I decided to make this project as a cool, portable way to track the conditions of different places you visit with the option to export the data via sd card for analysis.
Features: 5 screens (time, temperature, humidity, air pressure, graph) that are navigaated using a rotary encoder Saves recorded data to an SD card every 10 minuites for up to 1 week Screen automaticlaly sleeps to save power The last screen has a…

Main components on the Envirotector
Envirotector bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | ~ | RTC_DS3231 | U3 |
| 2 | ~ | Untitled | U4, U5 |
| 1 | OLED Display | 128x64OLED | J1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
Envirotector design files
The KiCad project lives in the Sn3akySqu1d/Envirotector repository on GitHub; these links point at the commit this page was built from.
Envirotector: common questions
What microcontroller does the Envirotector use?
The Envirotector is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Envirotector PCB?
The Envirotector measures 75 × 77.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Envirotector?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Envirotector design files?
From the Sn3akySqu1d/Envirotector repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Envirotector design in my own project?
The repository has no license, so all rights stay with Sn3akySqu1d. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Envirotector without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k