Flatline-SMD

soggybag·Flatline-SMD

Flatline-SMD PCB layout, top view — open source board by soggybag

About the Flatline-SMD PCB

Flatline-SMD is an open source PCB design by soggybag, published on GitHub. It is a 2-layer board measuring 45 × 50 mm, with 33 components from 17 distinct parts.

Other key parts include the OPA2134 and TL072. By type, the board carries 14 resistors, 12 capacitors, 5 diodes and 2 ICs.

It belongs with the audio designs in this gallery.

From the project

An optical compressor for guitar, built on John Hollis's Flatline with Atomium Amps' mods and your OPA2134 build (super-freq.com/flatline-op2134). Added: - BLEND (parallel compression); - a gain-reduction LED; - a RELEASE switch; - a side chain buffered off the audio path.

An optical compressor for guitar, built on John Hollis's Flatline with Atomium Amps' mods and your OPA2134 build (super-freq.com/flatline-op2134). Added: - BLEND (parallel compression); - a gain-reduction LED; - a RELEASE switch; - a side chain buffered off the audio path.

SMD parts are assembled by JLCPCB; the panel parts are hand-soldered on the back.

- Outline and drilling: the Trem v2 board outline (45 × 50 mm) and its 1590B panel grid. - Top row: SUSTAIN · GR LED · ON LED · VOLUME (the two LEDs 6 mm apart in the centre). - Middle: RELEASE · BLEND · TIGHT (TIGHT uses the Trem v2's…

Flatline-SMD, from the project README
From the project README

Main components on the Flatline-SMD

Flatline-SMD bill of materials (BOM)

33 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
OPA2134
U1
1
TL072
U2
1
SS14
D1
4
B5819W
D2, D3, D4, D5
2
22U
22u
C1, C4
3
100N
100n
C2, C3, C14
1
220N
220n
C5
1
47P
47p
C6
1
220P
220p
C7
2
220U
220u
C8, C9
2
10U
10u
C12, C13
6
10K
10k
R1, R2, R6, R8, R10, R11
4
1M
R3, R4, R13, R14
1
220K
220k
R7
1
47K
47k
R9
1
330
R12
1
4K7
4k7
R15

Flatline-SMD design files

The KiCad project lives in the soggybag/Flatline-SMD repository on GitHub; these links point at the commit this page was built from.

Flatline-SMD: common questions

How big is the Flatline-SMD PCB?

The Flatline-SMD measures 45 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Flatline-SMD?

33 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Flatline-SMD design files?

From the soggybag/Flatline-SMD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Flatline-SMD design in my own project?

The repository has no license, so all rights stay with soggybag. Use it as a reference, and ask the author before reusing the design.

Similar boards