17 open source boards using the OPA2134
Real designs built with the OPA2134, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Hardmpu wt
PickledDog
106.1 × 95.4 mm46 parts2LApache-2.030BeoGram-4002-RIAA
leicht-io
112 × 202 mm57 parts2LCERN-OHL-S-2.05Fat bastard main
a-wai
195 × 50 mm58 parts2LCERN-OHL-1.24Athena
JanKoppe
100 × 100 mm123 parts2LNo license2ESP32
Wm8816
hrandib
100 × 100 mm161 parts2LNo license0EurorackVco
thismatters
50.5 × 128.5 mm103 parts2LNo license0Deloop lite mk0
hmcty
178 × 83.3 mm84 parts4LMIT0Goya1746
escaroda
115 × 70 mm83 parts2LMIT0Peak detect
larsimmisch
33 × 59.7 mm65 parts2LNo license0Audio preamplifier
flavian112
81.3 × 58.4 mm42 parts2LNo license0Flatline-SMD
soggybag
45 × 50 mm33 parts2LNo license0Audio-Power-Amplifier
Davidos1243
50.8 × 48.3 mm28 parts2LNo license0RMoy
Chlorophytus
91.5 × 56.5 mm20 parts2LMIT0- schematic only · 142 parts
DSPAmp
Zighhi
142 partsCC-BY-SA-4.00 Voice dg
centrevillage
50.5 × 128.5 mm75 parts2LMIT10Stereo Preamplifier
PeraZver
83 × 54 mm51 parts2LNo license7Mixer
larsimmisch
35.6 × 38.1 mm12 parts2LNo license0
How designs wire the OPA2134
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the OPA2134 connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 12 of 15 designs, most often 10 kΩ (then 100 kΩ).
- Pin 1 has a series resistor on 11 of 15 designs, most often 10 kΩ (then 1.5 kΩ).
- Pin 7 has a series resistor on 11 of 15 designs, most often 10 kΩ (then 220 kΩ).
- The V+ pin has a decoupling capacitor on 8 of 15 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: A connector 20% |
|
| -pin 2, 6 | Connected to: Signal 97% |
|
| +pin 3, 5 | Connected to: Signal 77% · GND 23% |
|
| V-pin 4 | Connected to: -12V 60% · GND 40% |
|
| Pin 7 | Connected to: Signal 93% |
|
| V+pin 8 | Connected to: 12V 93% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hardmpu wt by PickledDog, Voice dg by centrevillage, Stereo Preamplifier by PeraZver and BeoGram-4002-RIAA by leicht-io.
The OPA2134 in open source designs
The gallery holds 17 open source boards using the OPA2134 from 16 GitHub repositories; a typical one measures about 87.3 × 64.8 mm and carries around 58 components.
94% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is Hardmpu wt by PickledDog.
Parts used alongside the OPA2134
Microcontrollers on boards using the OPA2134
What boards using the OPA2134 are built for
OPA2134: common questions
Where can I find a OPA2134 reference design?
Each of the 17 boards on this page is a real design using the OPA2134. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the OPA2134 - pin?
The - pins have a series resistor on 12 of 15 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 15 open source designs using the OPA2134.
What resistor goes on the OPA2134 pin 1?
Pin 1 has a series resistor on 11 of 15 designs, most often 10 kΩ (then 1.5 kΩ). Counted from the KiCad layouts of 15 open source designs using the OPA2134.
What resistor goes on the OPA2134 pin 7?
Pin 7 has a series resistor on 11 of 15 designs, most often 10 kΩ (then 220 kΩ). Counted from the KiCad layouts of 15 open source designs using the OPA2134.
Which microcontrollers do boards using the OPA2134 use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the OPA2134?
The median is 87.3 × 64.8 mm, and 94% are two-layer designs.
What is the most popular open source board using the OPA2134?
By GitHub stars, Hardmpu wt by PickledDog, with 30 stars.
Can I simulate one of these boards using the OPA2134 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.