Ugly face-1-smd
soggybag·ugly-face-1-smd
About the Ugly face-1-smd PCB
Ugly face-1-smd is an open source PCB design by soggybag, published on GitHub. It is a 2-layer board measuring 50.5 × 32.7 mm, with 24 components from 15 distinct parts.
Other key parts include the LM386 and TLC555. By type, the board carries 11 capacitors, 10 resistors, 2 ICs and 1 diode.
It belongs with the audio designs in this gallery.
From the project
A gated, envelope-controlled square-wave synth fuzz for guitar, in a Hammond 1590B. LM386 + TLC555, SMD parts assembled by JLCPCB, panel parts hand-soldered.
A gated, envelope-controlled square-wave synth fuzz for guitar, in a Hammond 1590B. LM386 + TLC555, SMD parts assembled by JLCPCB, panel parts hand-soldered.
The guitar never reaches the output. You hear a 555 square-wave oscillator, and the guitar controls it in three ways:
1. Gate. An LM386 at gain 200 turns the guitar into a clipped square, which drives the 555's RESET pin. The oscillator switches on and off every guitar cycle. 2. Sync. Each reset empties the timing capacitor, so the oscillator restarts in step with the note (hard sync). 3. Pitch bend. The LM386 output also lights a DIY…

Main components on the Ugly face-1-smd
Ugly face-1-smd bill of materials (BOM)
24 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM386 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TLC555 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SS14 | D_SMA_Handsoldering | D1 |
| 2 | 22U 22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C5 |
| 1 | 1n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 5 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6, C7, C8, C9 |
| 1 | 2.2U 2.2u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 10N 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 2 | 22K 22k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R9 |
| 4 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R8, R10 |
| 1 | 2K2 2k2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
Ugly face-1-smd design files
The KiCad project lives in the soggybag/ugly-face-1-smd repository on GitHub; these links point at the commit this page was built from.
Ugly face-1-smd: common questions
How big is the Ugly face-1-smd PCB?
The Ugly face-1-smd measures 50.5 × 32.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ugly face-1-smd?
24 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ugly face-1-smd design files?
From the soggybag/ugly-face-1-smd repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ugly face-1-smd design in my own project?
The repository has no license, so all rights stay with soggybag. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687