18 open source boards using the TLC555
Real designs built with the TLC555, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ventilator Main Board
RespiraWorks
350 × 155 mm646 parts4LApache-2.0168KicadJE MoogVCF 1
promesoft
100 × 100 mm235 parts2LNo license12Micro-Pico Tiny Monosynth
JordanAceto
134.6 × 113 mm282 parts4LCC-BY-4.011STM32
KicadJE uP DAC
promesoft
100 × 100 mm269 parts2LNo license7OBeMS
johnbeardmore
180 × 120 mm123 parts2LLGPL-3.03Class D Amp
zerberros
140.5 × 79 mm77 parts2LNo license3ESP32
NixieNTPClock
bastian-bou
181.4 × 77.2 mm58 parts4LGPL-3.03555MonoStableRelay
MichMich
30.5 × 39.4 mm13 parts2LNo license3PWM-H-Bridge
NealEhardt
70 × 71 mm35 parts2LNo license2Lpg
xdylanm
40 × 100 mm66 parts2LMIT0Ugly-Face-3-SMD
soggybag
53 × 52.1 mm64 parts2LNo license0Ugly face-1-smd
soggybag
50.5 × 32.7 mm24 parts2LNo license0- schematic only · 20 parts
Kicad automation
grahame-white
20 partsMIT0 KicadJE MoogVCF 1b
promesoft
100 × 100 mm235 parts2LNo license12AStable Timer LED Badge
monero-project
100 × 95 mm78 parts2LCERN-OHL-1.2115Magpie SAO
joshajohnson
49 × 36.6 mm7 parts2LGPL-3.05AVR/Arduino
Radioactivity
le-flav-b
95 × 75 mm40 parts2LNo license1Josh Ox Ribbon Synth ADSR board
JordanAceto
172.7 × 108 mm120 parts2LCC-BY-4.01
How designs wire the TLC555
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the TLC555 connects to, and the resistors, capacitors and other passives placed on it.
- The CV pin has a capacitor to GND on 14 of 16 designs, most often 10 nF (then 1 nF).
- The THR pin has a capacitor to GND on 14 of 16 designs, most often 1 µF (then 2.2 nF).
- The THR pin has a series resistor on 12 of 16 designs, most often 100 kΩ (then 100 Ω).
- The TR pin has a capacitor to GND on 10 of 16 designs, most often 1 µF (then 2.2 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| TRpin 2 | Connected to: Signal 100% |
|
| Qpin 3 | Connected to: Signal 100% |
|
| CVpin 5 | Connected to: Signal 88% |
|
| THRpin 6 | Connected to: Signal 100% |
|
| DISpin 7 | Connected to: Signal 75% · not connected 25% |
|
| VCCpin 8 | Connected to: 12V 88% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ventilator Main Board by RespiraWorks, AStable Timer LED Badge by monero-project, KicadJE MoogVCF 1 by promesoft and Micro-Pico Tiny Monosynth by JordanAceto.
The TLC555 in open source designs
The gallery holds 18 open source boards using the TLC555 from 17 GitHub repositories; a typical one measures about 100 × 95 mm and carries around 72 components.
82% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Ventilator Main Board by RespiraWorks.
Microcontrollers on boards using the TLC555
What boards using the TLC555 are built for
TLC555: common questions
Where can I find a TLC555 reference design?
Each of the 18 boards on this page is a real design using the TLC555. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLC555 CV pin connected?
The CV pin has a capacitor to GND on 14 of 16 designs, most often 10 nF (then 1 nF). Counted from the KiCad layouts of 16 open source designs using the TLC555.
How is the TLC555 THR pin connected?
The THR pin has a capacitor to GND on 14 of 16 designs, most often 1 µF (then 2.2 nF). Counted from the KiCad layouts of 16 open source designs using the TLC555.
How is the TLC555 TR pin connected?
The TR pin has a capacitor to GND on 10 of 16 designs, most often 1 µF (then 2.2 nF). Counted from the KiCad layouts of 16 open source designs using the TLC555.
What parts are used alongside the TLC555?
The TL072, TL074, CD4052B and DS18B20 appear in the most repositories here.
Which microcontrollers do boards using the TLC555 use?
Most are built on STM32 (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the TLC555?
The median is 100 × 95 mm, and 82% are two-layer designs.
What is the most popular open source board using the TLC555?
By GitHub stars, Ventilator Main Board by RespiraWorks, with 168 stars.
Can I simulate one of these boards using the TLC555 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.