125kHz RFID board
SolderedElectronics·125kHz-RFID-UART-board-hardware-design·CAD/V2.3.0/125kHz RFID board.kicad_pcb
About the 125kHz RFID board
125kHz RFID board is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 38 mm, with 68 components from 35 distinct parts.
Its main chip is the ATTINY1604-SSNR, from the AVR/Arduino family. Other key parts include the NMOS-DUAL, LM358DR and TPS613222A. By type, the board carries 24 resistors, 15 capacitors, 7 relays, 6 jumpers, 5 ICs and 5 diodes.
From the project
Hardware design, BOM, gerbers and 3D files for 125kHz-RFID-UART-board designed by Soldered Electronics.
RFID is a type of communication in which information is transmitted wirelessly (Wikipedia article). Today, it is becoming increasingly popular and can be found in numerous and various cards: driving licenses, access control to buildings, public transportation, etc.
RFID readers come in many forms and variants. This reader, from our production, enables easy connection to a microcontroller, thereby opening up possibilities for developing various projects based on RFID technology. The breakout comes in two versions, and depending on the version, it is programmed and ready for communication via…

Main components on the 125kHz RFID board
125kHz RFID board bill of materials (BOM)
68 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY1604-SSNR | SOIC-14 | U1 |
| 2 | NMOS-DUAL | SOT-363 | U2, U6 |
| 1 | LM358DR SGM358YMS/TR | MSOP-8 | U3 |
| 1 | TPS613222A SE5218 | SOT-23-5 | U4 |
| 1 | SI2301DS | SOT-23-3 | Q1 |
| 1 | SI2302DS | SOT-23-3 | Q2 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP2 |
| 2 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP3, JP4 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | JP5 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP6 |
| 1 | S2B-XH-A S2B-XH-A(LF)(SN) | S2B-XH-A(LF)(SN) | K1 |
| 1 | HEADER-UPDI | HEADER-UPDI | K2 |
| 2 | easyC-SMD | easyC-connector | K3, K5 |
| 1 | HEADER_MALE_5X1 | HEADER_MALE_5X1 | K4 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K6 |
| 1 | DSHP03TS-S | DSHP03TS-S | K7 |
| 3 | M4_DIODA | M4_DIODA | D1, D2, D3 |
| 2 | blue | 0402LED | D4, D5 |
| 5 | 100N 100n | 0603C | C1, C2, C9, C10, C15 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | C0603C102K5RACTU | 0603C | C3, C4, C5, C6, C8 |
| 1 | CL21A475KBQNNNE | 0805C | C7 |
| 2 | CL10A226MP8NUNE 2u2 | 0603C | C11, C13 |
| 1 | CL21A475KBQNNNE 100n | 0603C | C12 |
| 1 | 10U 10u | 1206C | C16 |
| 5 | 1k | 0603R | R1, R2, R17, R18, R19 |
| 4 | 10K 10k | 0603R | R3, R4, R6, R7 |
| 1 | 220 10R | 0603R | R5 |
| 1 | 10R | 0603R | R8 |
| 3 | 1M | 0603R | R9, R10, R13 |
| 1 | 220R | 0603R | R11 |
| 1 | 100K 100k | 0603R | R12 |
| 1 | 4k7 | 0603R | R14 |
| 5 | 10k | 0603R | R15, R21, R22, R23, R24 |
| 2 | 2K2 2k2 | 0402R | R16, R20 |
125kHz RFID board design files
The KiCad project lives in the SolderedElectronics/125kHz-RFID-UART-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
125kHz RFID board: common questions
What microcontroller does the 125kHz RFID board use?
The 125kHz RFID board is built around the ATTINY1604-SSNR, from the AVR/Arduino family.
How big is the 125kHz RFID board?
The 125kHz RFID board measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 125kHz RFID board?
68 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 125kHz RFID board design files?
From the SolderedElectronics/125kHz-RFID-UART-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 125kHz RFID board design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the 125kHz RFID board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in 125kHz-RFID-UART-board-hardware-design
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k