Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design
SolderedElectronics·Alcohol--Ethanol-sensor-MQ3-breakout-qwiic-hardware-design·CAD/V1.1.1/MQ Breakout.kicad_pcb
About the Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design
Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 54 mm, with 26 components from 16 distinct parts.
Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the MQ-X, NMOS-DUAL and TPS613222A. By type, the board carries 6 resistors, 4 ICs, 4 relays, 4 capacitors, 2 jumpers and 1 diode.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Alcohol,-Ethanol-sensor-MQ3-breakout-qwiic designed by Soldered Electronics.
MQ sensors, including the MQ3 sensor, have the capability to detect various gases. The MQ3 sensor is specifically designed to detect alcohol vapors. This means it is sensitive to alcohols such as methanol, ethanol, and isopropanol. The MQ3 sensor is commonly used for measuring alcohol concentration in the air and serves as a useful tool for alerting to the presence of alcohol in the environment.

Main components on the Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design
Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design bill of materials (BOM)
26 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MQ-X | MQ | U1 |
| 1 | NMOS-DUAL | SOT-363 | U2 |
| 1 | TPS613222A | tps613222a | U3 |
| 1 | ATTINY404-SSNR | SOIC-14 | U4 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP2 |
| 2 | easyC-SMD | easyC-connector | K1, K3 |
| 1 | HEADER-UPDI | HEADER-UPDI | K2 |
| 1 | DSHP03TS-S | DSHP03TS-S | K4 |
| 1 | purple | 0402LED | D1 |
| 1 | DFE201612E-2R2M=P2 | 0806L | L1 |
| 2 | CL10A226MPCNUBE | 0805C | C1, C2 |
| 1 | C1608X7S1A475K080AC | 0805C | C3 |
| 1 | 100N 100n | 0603C | C4 |
| 5 | 10K 10k | 0603R | R1, R2, R3, R4, R5 |
| 1 | 2K2 2k2 | 0402R | R6 |
Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design design files
The KiCad project lives in the SolderedElectronics/Alcohol--Ethanol-sensor-MQ3-breakout-qwiic-hardware-design repository on GitHub; these links point at the commit this page was built from.
Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design: common questions
What microcontroller does the Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design use?
The Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.
How big is the Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design?
The Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design measures 22 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design?
26 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design design files?
From the SolderedElectronics/Alcohol--Ethanol-sensor-MQ3-breakout-qwiic-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k