Breadboard power supply board hardware design
SolderedElectronics·Breadboard-power-supply-board-hardware-design·CAD/V1.1.1/Breadboard_power_supply.kicad_pcb
About the Breadboard power supply board hardware design
Breadboard power supply board hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 54 × 29.5 mm, with 24 components from 17 distinct parts.
Other key parts include the 7805 and SE5218. By type, the board carries 6 relays, 4 capacitors, 3 switches, 3 diodes, 3 resistors and 2 ICs.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Breadboard-power-supply-board designed by Soldered Electronics.
If you need a simple and stable power source for your breadboard projects, this board is here to help. Supply it with DC jack DC power or using UCB-C cable, and the board provides 3.3V, 5V or 12V directly to the power supply lines on the breadboard. Output voltages are adjustable seperately using the onboard switches. There’s a power LED, a power switch and an automatic voltage selection circuit, in case both power inputs are there.

Main components on the Breadboard power supply board hardware design
Breadboard power supply board hardware design bill of materials (BOM)
24 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 7805 | AS7805ADTR | U1 |
| 1 | SE5218 | SOT-23-5 | U2 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K1 |
| 1 | DC_JACK | DC_JACK | K2 |
| 4 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K3, K4, K5, K6 |
| 1 | SK-3245S-L3-B | SK-3245S-L3-B | S1 |
| 2 | SS-3292S-L1 | SS-3292S-L1 | S2, S3 |
| 1 | BAT20J | SOD-323 | D1 |
| 1 | M4_DIODA | M4_DIODA | D2 |
| 1 | purple | 0402LED | D3 |
| 2 | 2.2UF 2.2uF | 0603C | C1, C4 |
| 1 | 1UF 1uF | 0603C | C2 |
| 1 | 0.1UF 0.1uF | 0603C | C3 |
| 2 | 5.1K 5.1k | 0603R | R1, R2 |
| 1 | 2K2 2k2 | 0402R | R3 |
Breadboard power supply board hardware design design files
The KiCad project lives in the SolderedElectronics/Breadboard-power-supply-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
Breadboard power supply board hardware design: common questions
How big is the Breadboard power supply board hardware design?
The Breadboard power supply board hardware design measures 54 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breadboard power supply board hardware design?
24 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breadboard power supply board hardware design design files?
From the SolderedElectronics/Breadboard-power-supply-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Breadboard power supply board hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k