Dasduino CORE Solder kit
SolderedElectronics·Dasduino-CORE-Solder-kit-hardware-design·CAD/V1.0.0/Dasduino_CORE_Solder_kit.kicad_pcb
About the Dasduino CORE Solder kit PCB
Dasduino CORE Solder kit is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 54 × 70 mm, with 57 components from 34 distinct parts.
Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. Other key parts include the CH340C, TPS7A2633DRVR, NMOS-DUAL and TP4056M. By type, the board carries 17 resistors, 13 capacitors, 7 diodes, 5 ICs, 5 relays and 3 jumpers.
From the project
Hardware design, BOM, gerbers and 3D files for Dasduino-CORE-Solder-kit designed by Soldered Electronics.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Dasduino CORE Solder kit
Dasduino CORE Solder kit bill of materials (BOM)
57 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C | SOP-16 | U1 |
| 1 | ATMEGA328P-PU ATmega328P-PU | ATmega328P-PU | U2 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR | U3 |
| 1 | NMOS-DUAL | SOT-363 | U4 |
| 1 | TP4056M | TP4056M-MSOP8 | U5 |
| 1 | PMOS | SOT-23-3 | Q1 |
| 1 | 16MHZ 16MHz | CRYSTAL_3225__4_PAD | X1 |
| 1 | 1206FUSE-500MA 1206FUSE-500mA | 1206FUSE | F1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | SMD_JUMPER_3_PAD_TRACE SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | JP1 |
| 1 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP2 |
| 1 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP3 |
| 1 | easyC-SMD | easyC-connector | K1 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K2 |
| 1 | JST-2pin-SMD | JST-2pin-SMD | K3 |
| 1 | HEADER_MALE_15X1 | HEADER_MALE_15X1 | K4 |
| 1 | HEADER_MALE_15X1 HEADER_MALE_13X1 | HEADER_MALE_13X1 | K5 |
| 2 | 4-1437565-2 | 4-1437565-2 | SW1, SW2 |
| 1 | WS2812B-2020 | WS2812B-2020 | D1 |
| 1 | THT_LED_5MM_PURPLE | THT LED 5mm PURPLE | D2 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | THT_LED_5MM_ORANGE | THT LED 5mm ORANGE | D3 |
| 1 | BAT20J | SOD-323 | D4 |
| 1 | THT_LED_5MM_RED | THT LED 5mm RED | D5 |
| 1 | THT_LED_5MM_BLUE | THT_LED_5MM_BLUE | D6 |
| 1 | THT_LED_5MM_WHITE | THT LED 5mm WHITE | D7 |
| 7 | 100N 100n | C_Ceramic_THT_5mm | C1, C2, C3, C4, C7, C9, C10 |
| 2 | 22P 22p | C_Ceramic_THT_5mm | C5, C6 |
| 4 | KS225M050C07RR0VH2FP0 | C_POL_8x12x3.5mm | C8, C11, C12, C13 |
| 3 | 1k | THT OTPORNIK | R1, R3, R5 |
| 5 | 2K2 2k2 | THT OTPORNIK | R2, R4, R6, R14, R17 |
| 2 | 5K1 5k1 | 0603R | R7, R10 |
| 5 | 10K 10k | THT OTPORNIK | R8, R9, R11, R12, R13 |
| 1 | 100K 100k | THT OTPORNIK | R15 |
| 1 | 3k | 0603R | R16 |
Dasduino CORE Solder kit design files
The KiCad project lives in the SolderedElectronics/Dasduino-CORE-Solder-kit-hardware-design repository on GitHub; these links point at the commit this page was built from.
Dasduino CORE Solder kit: common questions
What microcontroller does the Dasduino CORE Solder kit use?
The Dasduino CORE Solder kit is built around the ATMEGA328P-PU, from the AVR/Arduino family.
How big is the Dasduino CORE Solder kit PCB?
The Dasduino CORE Solder kit measures 54 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dasduino CORE Solder kit?
57 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dasduino CORE Solder kit design files?
From the SolderedElectronics/Dasduino-CORE-Solder-kit-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dasduino CORE Solder kit design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Dasduino CORE Solder kit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k