Dasduino COREPLUS panel
SolderedElectronics·Dasduino-COREPLUS-hardware-design·CAD/V1.1.0/PANEL/Dasduino COREPLUS_panel.kicad_pcb
About the Dasduino COREPLUS panel PCB
Dasduino COREPLUS panel is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 193.9 × 142 mm, with 86 components from 40 distinct parts.
Its main chip is the ATMEGA2560-16AU, from the AVR/Arduino family. Other key parts include the CH340C, TPS7A2633DRVR, TP4056M, NMOS-DUAL and TXB0104QPWRQ1. By type, the board carries 26 capacitors, 22 resistors, 7 relays, 7 diodes, 6 ICs and 6 jumpers.
From the project
Hardware design, BOM, gerbers and 3D files for Dasduino-COREPLUS designed by Soldered Electronics.
The soldered version of the ATmega2560 microcontroller board has arrived! It is designed for enthusiasts and professionals in the field of electronics and DIY projects. The heart of the board, the ATmega2560, is a powerful 8-bit microcontroller that offers enough processing power for demanding applications. The board comes with a large number of digital and analog inputs/outputs, allowing users to connect various sensors and actuators. The ATmega2560 contains a significant amount of Flash memory, SRAM, and EEPROM, which is sufficient for complex applications and data storage. The USB…

Main components on the Dasduino COREPLUS panel
Dasduino COREPLUS panel bill of materials (BOM)
86 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C | SOP-16 | U1 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR | U2 |
| 1 | TP4056M | TP4056M-MSOP8 | U3 |
| 1 | ATMEGA2560-16AU | TQFP-100 | U4 |
| 1 | NMOS-DUAL | SOT-363 | U5 |
| 1 | TXB0104QPWRQ1 | TXB0104QPWRQ1 | U6 |
| 2 | PMOS | SOT-23-3 | Q1, Q2 |
| 1 | 16MHZ 16MHz | CRYSTAL_3225__4_PAD | X1 |
| 1 | 1206FUSE-500MA 1206FUSE-500mA | 1206FUSE | F1 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 3 | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | JP1, JP2, JP3 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP4 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP5, JP6 |
| 1 | easyC-SMD | easyC-connector | K1 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K2 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K3 |
| 2 | HEADER_MALE_40X1 | HEADER_MALE_40X1 | K4, K5 |
| 1 | HEADER_MALE_20X1 | HEADER_MALE_20x1 | K6 |
| 1 | HYC77-TF09-200 | HYC77-TF09-200 | K8 |
| 2 | YTSA007A0151803B | YTSA007A0151803B | SW1, SW2 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TEST_POINT_SMD_0.8MM Test_Point_SMD_0.8mm | Test_Point_SMD_0.8mm | TP1, TP2 |
| 1 | blue | 0402LED | D1 |
| 2 | orange | 0402LED | D2, D6 |
| 1 | purple | 0402LED | D3 |
| 1 | WS2812B-2020 | WS2812B-2020 | D4 |
| 1 | red | 0402LED | D5 |
| 1 | BAT20J | SOD-323 | D7 |
| 14 | 100N 100n | 0603C | C1, C2, C4, C10, C11, C18, C19, C20 +6 |
| 5 | 2U2 2u2 | 0603C | C3, C5, C7, C8, C9 |
| 1 | 270P 270p | 0603C | C6 |
| 4 | 10U 10u | 1206C | C12, C13, C14, C15 |
| 2 | 22P 22p | 0603C | C16, C17 |
| 3 | 1k | 0603R | R1, R2, R5 |
| 4 | 2K2 2k2 | 0402R | R3, R4, R12, R17 |
| 1 | 330 | 0402R | R6 |
| 2 | 5K1 5k1 | 0603R | R7, R8 |
| 5 | 100K 100k | 0603R | R9, R13, R14, R15, R16 |
| 5 | 10K 10k | 0603R | R10, R19, R20, R21, R22 |
| 1 | 3k | 0603R | R11 |
| 1 | 100 | 0603R | R18 |
Dasduino COREPLUS panel design files
The KiCad project lives in the SolderedElectronics/Dasduino-COREPLUS-hardware-design repository on GitHub; these links point at the commit this page was built from.
Dasduino COREPLUS panel: common questions
What microcontroller does the Dasduino COREPLUS panel use?
The Dasduino COREPLUS panel is built around the ATMEGA2560-16AU, from the AVR/Arduino family.
How big is the Dasduino COREPLUS panel PCB?
The Dasduino COREPLUS panel measures 193.9 × 142 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dasduino COREPLUS panel?
86 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dasduino COREPLUS panel design files?
From the SolderedElectronics/Dasduino-COREPLUS-hardware-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Dasduino COREPLUS panel design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Dasduino COREPLUS panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Dasduino-COREPLUS-hardware-design
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k